5.0/ 5.0
100% pembeli merasa puas
63 rating • 23 ulasan
5(63)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 2
Subtotal
Rp170.000
Tamiya 18102 Lupine Racer / Wolf 2 (AR chassis)
Rp170.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Tamiya Kit
[A wolf with a lovely expression drives a mini 4WD! ]
●This is a plastic model assembly kit of a high-performance racer that uses shaft drive four-wheel drive.
-Mini 4WD Wolf 2 is a machine with a fearless wolf on the Thundershot open top, which is characterized by its lightweight and compact form.
- Moreover, the wolf driver has been carefully assembled and painted.
-The tense expression created by her sharp eyes is sure to liven up the race.
-In addition, the AR chassis, which incorporates plenty of essential elements for Mini 4WD such as aerodynamics, maintainability, and rigidity, is a deep red made of sturdy polycarbonate ABS.
●Fluorescent orange 5-spoke wheels add a touch of glamor to your feet, and dark blue large-diameter hard slick tires are standard equipment.
- Also includes Tamiya's Twin Star logo and bib number metallic sticker.
[AR chassis full of functions]
●The AR chassis not only pursues aerodynamics, but also has the elements necessary for a mini 4WD such as maintainability, rigidity, and expandability.
●The running wind flows smoothly through the underside to cool the battery and motor inside the chassis, preventing power down due to heat.
●Also, it is equipped with a low-friction resin plastic bearing to reduce drive loss and reduce weight.
●The under panel and diffuser can be easily removed without removing the body.
●Furthermore, a rear skid bar is standard equipment.
●When passing through slope courses such as slope sections, the low-friction resin skid bar comes into contact with the road surface.
●Stabilizes the machine's posture and prevents it from going off the course.
●The gear ratio is set to 5:1.
[Basic specifications]
●Completed length 155mm, width 97mm, height 47mm
●Motor included
●Installed assembly requires no adhesive
[Required separately]
●2 AA batteries
●Package size/weight: 23 x 14.2 x 5.5cm / 198g
●This is a plastic model assembly kit of a high-performance racer that uses shaft drive four-wheel drive.
-Mini 4WD Wolf 2 is a machine with a fearless wolf on the Thundershot open top, which is characterized by its lightweight and compact form.
- Moreover, the wolf driver has been carefully assembled and painted.
-The tense expression created by her sharp eyes is sure to liven up the race.
-In addition, the AR chassis, which incorporates plenty of essential elements for Mini 4WD such as aerodynamics, maintainability, and rigidity, is a deep red made of sturdy polycarbonate ABS.
●Fluorescent orange 5-spoke wheels add a touch of glamor to your feet, and dark blue large-diameter hard slick tires are standard equipment.
- Also includes Tamiya's Twin Star logo and bib number metallic sticker.
[AR chassis full of functions]
●The AR chassis not only pursues aerodynamics, but also has the elements necessary for a mini 4WD such as maintainability, rigidity, and expandability.
●The running wind flows smoothly through the underside to cool the battery and motor inside the chassis, preventing power down due to heat.
●Also, it is equipped with a low-friction resin plastic bearing to reduce drive loss and reduce weight.
●The under panel and diffuser can be easily removed without removing the body.
●Furthermore, a rear skid bar is standard equipment.
●When passing through slope courses such as slope sections, the low-friction resin skid bar comes into contact with the road surface.
●Stabilizes the machine's posture and prevents it from going off the course.
●The gear ratio is set to 5:1.
[Basic specifications]
●Completed length 155mm, width 97mm, height 47mm
●Motor included
●Installed assembly requires no adhesive
[Required separately]
●2 AA batteries
●Package size/weight: 23 x 14.2 x 5.5cm / 198g
Ada masalah dengan produk ini?