US-400S New Original Ultrasonic Sensor Double Circuit Switching

Barang Preorder/Indent Estimasi 15-20 hari. Origin : CN(Origin) Usage : Position Sensor Material : Polymer Type : Vibration Sensor Output : Switching Transducer Theory : Optical Sensor Model Number : US-400S KRD us-400s ultrasonic correction sensor is an upgraded version of us-300, with higher sensitivity and stronger anti-interference. The principle of high frequency ultrasonic linear propagation is to detect the edge position of coil. Compared with the photoelectric sensor, it is not affected by the transparency of the material. It is especially suitable for the edge tracking application of high transparent materials (such as plastic film, cellophane, etc.) without adjustment. KRD Us-400s adopts high-grade aviation aluminum shell, solid and beautiful, which can improve the appearance of the equipment; 200K imported ultrasonic radiation sensor, 1ms reaction time, with offset display. Fully enclosed ultrasonic probe is to adapt to various harsh environments; It is suitable for edge tracking application of opaque, transparent and ultra transparent films without manual adjustment and calibration. The detection range is 5mm and the detection accuracy is 0.1mm. Two NPN switches and one 0-5V analog output are suitable for most controller signals. In order to meet the needs of different occasions, the new switch blind area adjustment function is added 1: Press and hold the #34;set #34; key for 7 seconds until the middle blue light flashes (the blind area is 0.5mm in this state) 2: Press the #34;set #34; key for a short time, two yellow lights flash (the blind area is 1.0 mm in this state) 3: Press the #34;set #34; key for a short time, two red lights flash (the blind area is 2.0 mm in this state) 4: After selecting the required working state, press and hold #34;set #34; key for 6 seconds to save.