HOTDEALS Panasonic DP-102 Digital Vacuum and Pressure Gauge

SELAMAT DATANG DI YAKA JAYA!

MOHON DIBACA & PERHATIKAN :
- TANYAKAN STOK/VARIAN TERLEBIH DAHULU KARENA STOK BISA BERUBAH SEWAKTU WAKTU
- TIDAK MELAYANI PENGIRIMAN VIA COD ATAU INSTAN KURIR
- MENGHARGAI KESOPANAN DALAM MELAKUKAN TRANSAKSI
- BACA DAN PERHATIKAN DESKRIPSI DENGAN BAIK
- 100% AMANAH

*** READY STOCK, SILAHKAN DI ORDER ***

*** Panasonic DP-102 Digital Pressure Controller -0.1 ~ 1 MPa ***

100% New Original Genuine, NOT Refurbished, NOT Secondhand !!

Accurate Pressure/Vacuum Sensor with Superior Visibility

Part Number: DP-102

Process connector: M5 Female Thread and R 1/8 Male Thread

Cable length: 2m

CE marking directive compliance, EMC Directive, RoHS Directive

Type of pressure: Gauge pressure

Rated pressure range: -0.1000 to +1.000 Mpa

Set pressure range: -0.1 to +1.010 MPa / -1 to +10.30 kgf/cm2 / -1 to + 10.10 bar / -14.65 to +146.5 psi

Pressure withstandability: 1.5 MPa

Applicable fluid: Air, non-corrosive gas

units: MPa

Supply voltage: 12 to 24 V DC 10 or less

Power consumption: 30 mA or less

Comparative output: NPN open-collector transistor

- Maximum sink current: 50 mA

- Applied voltage: 30 V DC or less (between comparative output and 0 V)

- Residual voltage: 2 V or less (at 50 mA sink current)

Comparative output : Output operation

Selectable either NO or NC by key operation

Comparative output : Hysteresis

Minimum 2 digits (variable)

Comparative output : Repeatability 0.4 % F.S. (within 4 digits)

Comparative output : Response time 2.5 ms, 25 ms, 250 ms, selectable by key operation

Comparative output : Short-circuit protection

Display: 3 + 1/2 digits, 3-color (white / red / pink) LCD display (Display update period: 250 ms)

Display : Displayable pressure range (-0.100 to +1.010 MPa

Protection: IP40 (IEC)

Ambient temperature: 0 to +50 +32 to +122 (No dew condensation allowed), Storage: -10 to +60 +14 to +140

Ambient