Tester Digital SC8108 Networking Cabe Tester

Device type: network tester

Interface: USB

Properties: measuring wire


UTP STP Cat5E/Cat6 RJ45 Lan Network Cable Length Tester SC-8108

1. Measure network cable length to an end or broken point.

2. Check wiring error in STP UTP 5E, 6E, coaxial cable, such as open circuit,short circuit, jumper wire, reverse connection.

3. Display by big LCD, with clear wiremap.

4. Automatically time-delay shut off.

5. Length Calibration: User can set self-calibration factor by a given length cable (The length of calibrating cable needs to be more than 5M )

6. Self-checking and automatically compensate any change in battery capacity or ambient temperature.


The main function characteristics:

1.The cable connectivity test can be achieved by one person

2.Detects 5 e, 6 e coaxial cable and telephone line connection failure, including: open circuit, short circuit, jumper, reverse connection and series wound

3.Wiring/connection error of positioning

4.Measure the cable length, the location of the short circuit and locating open

5.The length of the cable dynamic calibration function, make the length measurement accuracy up to 98%

6.Easy to use, large screen display to make test results at a glance

7.Easy to carry

8.Automatic delay shutdown

9.Whether on distal recognizer can length measurement

10.Cable positioning, eight remote passive test socket (identification number ID1 standard)

11.Remote identification instrument audio prompt functions