Automatic Wind Power Charge Regulator 400W DC 14.5-29V MPPT Wind

Material Type : Cotton Origin : Mainland China Product Description: 1. The wind turbine can be controlled to automatically charge the battery 2. Modular design, so that the performance of the whole system is guaranteed to the greatest extent 3. The fully sealed and completely waterproof design is adopted, and the protection level has reached IP67 or above. 4. Using MPPT boost charging technology, it can be started when the breeze is low and the energy is sufficient, which can solve the problem that the fan speed is slow and cannot be charged. Wiring: 1. Connect the positive and negative poles of the battery to the battery positive (red wire) and negative (black wire) terminals of the controller respectively. 2. Connect the three-phase output voltage of the wind turbine to the three-phase input (green wire) terminals of the controller fan respectively. Parameters 1Maximum input AC voltage: AC35V; 2Output DC voltage: DC12V / 24V; 3Battery charging cut-off voltage: DC14.5V 0.3V / 29V 0.3V; 4Maximum charging current: 15A (12V) maximum charging current: 10A (24V); 5Wind driven generator speed limit voltage DC14.5V 0.3V, 29V 0.3V; 6Protection level: IP67; 7Static power consumption: 0.008A; 8Bearing power: 400W; 9Maximum bearing wind speed: lvl.12; 10Working temperature: -35 C - 65 C 11Input wiring: three-wire system; 12Control mode: 12V/24V compatible; 13Installation method: bolted; 14Wiring is shown in the schematic figure; do not reverse the positive and negative poles to avoid burning the controller. Product List: Wind Turbine Controller*1 See more product details 1.Wear-ResistantAutomatic wind power charge regulator is durable and wear-resistant, can be us