Satu Set Karburator (Besar) KEIHIN PWK Φ28mm KITACO HONDA NSR80

■Exclusive Mixed Refueling
■Main Jet #135, Pilot Jet #38 are already installed.
■for Race Parts
[Product Contents]
Parts Number: 401-1083028 PWK Φ28M Carburetor Assembly ×1pc.
Main Jet (PE/PWK/FCR)#132×1pc.
Parts Number: 450-3071380 Main Jet (PE/PWK/FCR)#138×1pc.
Parts Number: 521-0000100 Fuel Filter (Φ6) ×1pc.
Parts Number: 901-0019100 High Throttle Set (Cable Outer Length: 895mm) ×1pc.
Fuel Hose 50cm (Pink) Φ5×1pc.
Manifold Set×1pc.
Manifold Body ×1pc.
Stainless Band (Φ32-50) ×1pc.)

It is a Keihin PWK Φ:28 carburetors recommended for high tune engine. It achieves a sharp acceleration of Φ:28 large diameter and technology cultivated in the flat valve race etc.
*It is the specification of the carburetor as it is PWK Φ28 works replica was used in the race and built a lot of achievements. It is exclusively for a complete race specification vehicle, and it is a model that requires processing of an STD frame (unusable scooter) or cylinders.
The attached manifold increases the diameter of the port and increases the intake air volume.
It can install an up type exhaust system because it is left out.

NOTE: It is necessary to set up jet types depending on the specifications of the engine and riding environments. Please make sure to use OEM products for setting because KITACO Big Carburetor kit has adopted the all carburetor manufacturer OEM parts. It may cause trouble and the correct setting will not come out if it uses other than OEM.
*It is impossible to use STD air cleaner.
*It requires to remove or process the helmet box when installing on the NS-1.
*It is not possible to install STD intake chambers for NSR50/80 and NS-1 (95-).
*It is required to cut a part of the rubber part at the bottom of the manifold according to the year of MBX50.
[HONDA::CRM50 ][HONDA::CRM80 ][HONDA::MBX50 ][HONDA::NS-1 ][HONDA::NS50F ][HONDA::NSR50 ][HONDA::NSR80 ]
SKU : 375749