Atur jumlah dan catatan
Stok Total: Sisa 10
Subtotal
Rp375.500
Menzerna Polishing Compounds Heavy Cut 1000 Kompon Kendaraan Mobil Motor Kating Cating Cutting 1L 1000ml Obat Poles Bodi
Rp375.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Menzerna Polishing Compounds
Car polish for the speedy removal of deep scratches using foam polishing pads.
This powerful polish quickly and thoroughly removes scratches in car paint, scrapes, spray, and heavy signs of use. The Menzerna automotive polish for the speedy removal of sanding marks. Optimized for use with foam polishing pads. Guaranteed best value in the Heavy Cut segment.
Menzerna Heavy Cut Compound 1000 (HCC 1000) is a highly effective sanding polish for automotive clear coats. HCC 1000 removes overspray, severe signs of use and sanding marks effectively and reliably.
Processing:
Rotary:
800 rpm
Orbital:
Lower rotational speed range
Benefits:
Fast removal of sanding marks
Even sanding pattern
Reliable removal of deep scratches
No buildup of dust
A little goes a long way
Product Group: Heavy Cut
Category: Standard
Cut 9
Gloss: 3
Application: Paint shops
Storage: 5- 30°C, avoid frost and direct sunlight
Colour: White
Density: 1,5 kg/l
Viscosity: 5-15 Pas
Maximum abrasion: P1500-2000
Polishing tools: Heavy Cut Foam Pad
Speed recommendation for hard paint:
Rotary: 800 rpm
Orbital: lower speed range
Pressure recommendation: High pressure
Recommended Usage
Clean surface thoroughly prior to polishing.
Shake the bottle prior to use and apply the following quantity of the product onto the polishing pad.
Recommendation for a 40cm x 40cm area:
Pad with a diameter of 95mm: 3-4 pea-sized drops
Pad with a diameter of 150mm: 5 pea-sized drops
Pad with a diameter of 180mm: 6-7 pea-sized drops
Use the Menzerna Heavy Cut Foam Pad in the event of heavy signs of use.
Use either a rotary or an orbital polishing machine and use the cross-coating method. Apply strong, even pressure while polishing and extend the product with a constant low machine speed.
At first, the polish will seem a little milky and should be worked in until only a slightly transparent/oily film is visible.
Once you have finished polishing, remove any residue with our Premium Microfiber cloth, without applying any pressure.
Any signs of sanding marks and use have now been removed. For an exceptionally glossy finish, now apply one of our Menzerna Medium Cut Polishes and of our Menzerna Finishes.
This powerful polish quickly and thoroughly removes scratches in car paint, scrapes, spray, and heavy signs of use. The Menzerna automotive polish for the speedy removal of sanding marks. Optimized for use with foam polishing pads. Guaranteed best value in the Heavy Cut segment.
Menzerna Heavy Cut Compound 1000 (HCC 1000) is a highly effective sanding polish for automotive clear coats. HCC 1000 removes overspray, severe signs of use and sanding marks effectively and reliably.
Processing:
Rotary:
800 rpm
Orbital:
Lower rotational speed range
Benefits:
Fast removal of sanding marks
Even sanding pattern
Reliable removal of deep scratches
No buildup of dust
A little goes a long way
Product Group: Heavy Cut
Category: Standard
Cut 9
Gloss: 3
Application: Paint shops
Storage: 5- 30°C, avoid frost and direct sunlight
Colour: White
Density: 1,5 kg/l
Viscosity: 5-15 Pas
Maximum abrasion: P1500-2000
Polishing tools: Heavy Cut Foam Pad
Speed recommendation for hard paint:
Rotary: 800 rpm
Orbital: lower speed range
Pressure recommendation: High pressure
Recommended Usage
Clean surface thoroughly prior to polishing.
Shake the bottle prior to use and apply the following quantity of the product onto the polishing pad.
Recommendation for a 40cm x 40cm area:
Pad with a diameter of 95mm: 3-4 pea-sized drops
Pad with a diameter of 150mm: 5 pea-sized drops
Pad with a diameter of 180mm: 6-7 pea-sized drops
Use the Menzerna Heavy Cut Foam Pad in the event of heavy signs of use.
Use either a rotary or an orbital polishing machine and use the cross-coating method. Apply strong, even pressure while polishing and extend the product with a constant low machine speed.
At first, the polish will seem a little milky and should be worked in until only a slightly transparent/oily film is visible.
Once you have finished polishing, remove any residue with our Premium Microfiber cloth, without applying any pressure.
Any signs of sanding marks and use have now been removed. For an exceptionally glossy finish, now apply one of our Menzerna Medium Cut Polishes and of our Menzerna Finishes.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan