5.0/ 5.0
100% pembeli merasa puas
1 rating • 1 ulasan
5(1)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: Sisa 1
Subtotal
Rp4.499.000
Jumper T18 Pro v2 remote control multiprotocol JP4in1
Rp4.499.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Drone RC
VERSI : JP4IN1
Ready stok, bisa langsung diorder selama dipajang stok ready
++ INCLUDE BATERAI SONY VTC6 ORIGINAL 3000mAh ++
++ Untuk pemula tidak usah khawatir akan disupport full teknis sampai bisa seting dan terbang (DIJAMIN)
++ Free konsultasi teknis & sharing (lifetime after sales and technical support)
++ Free konsultasi & referensi untuk upgrade part atau yang lainnya
Jumper T18 PRO V2 ( Updated: 18 Juli 2021) - ini adalah Jumper T18PRO terbaru dari jumper yg mana sudah bisa touchscreen.
Notes:
1. ini versi PRO. Yg membedakan PRO dan non PRO ada d gimbalnya. PRO mengunakan gimbal Futaba buatan Japan (ALPS RDC90), sedangkan non Pro mengunakan Hall sensor gimbal biasa
2. PRO V2 touchscreen ready layarnya (EDGE TX)
3. PRO V2 hanya mengunakan JP4in1 internal module
Radio Features:
JP4-in-1 Multi-protocol module included DSM2/X, FrSKY, SFHSS, FlySky, FlySky AFHDS2A, Hubsan and more
OpenTX firmware
Voice function
Zipper Case Included
Adjustable LED Backlights
Vibration reminder function
USB-C online firmware upgrade
JR/FrSKY compatible module bay on rear side.
JP4IN1 module - 2.4G JP4IN1 Mulitprotokol
6-Flight Mode Buttons (for APM and Pixhawk flight controllers)
Support telemetry (depending on the receiver)
Up to 16 channels of output (can be extended into 32ch, depending on the receiver)
Specs:
Size: 180*190*58
Faceplate: Carbon
Gimbal Type: Hall Sensor
Weight: 888g (without battery)
Working voltage: DC7-8.4V (NO CRSF)
Channels: up to 32 channels (depending on the receiver)
Display: IPS480*272 (800 * 480 HD IPS touch screen interface reserved - expected to be supported by openTX2.4 and above)
Simulator mode: 3.5mm standard ppm output or USB HID
Package Included:
- 1 x T18 PRO V2 radio
- 1 x Zipper case
- 1 x USB-C c
Ready stok, bisa langsung diorder selama dipajang stok ready
++ INCLUDE BATERAI SONY VTC6 ORIGINAL 3000mAh ++
++ Untuk pemula tidak usah khawatir akan disupport full teknis sampai bisa seting dan terbang (DIJAMIN)
++ Free konsultasi teknis & sharing (lifetime after sales and technical support)
++ Free konsultasi & referensi untuk upgrade part atau yang lainnya
Jumper T18 PRO V2 ( Updated: 18 Juli 2021) - ini adalah Jumper T18PRO terbaru dari jumper yg mana sudah bisa touchscreen.
Notes:
1. ini versi PRO. Yg membedakan PRO dan non PRO ada d gimbalnya. PRO mengunakan gimbal Futaba buatan Japan (ALPS RDC90), sedangkan non Pro mengunakan Hall sensor gimbal biasa
2. PRO V2 touchscreen ready layarnya (EDGE TX)
3. PRO V2 hanya mengunakan JP4in1 internal module
Radio Features:
JP4-in-1 Multi-protocol module included DSM2/X, FrSKY, SFHSS, FlySky, FlySky AFHDS2A, Hubsan and more
OpenTX firmware
Voice function
Zipper Case Included
Adjustable LED Backlights
Vibration reminder function
USB-C online firmware upgrade
JR/FrSKY compatible module bay on rear side.
JP4IN1 module - 2.4G JP4IN1 Mulitprotokol
6-Flight Mode Buttons (for APM and Pixhawk flight controllers)
Support telemetry (depending on the receiver)
Up to 16 channels of output (can be extended into 32ch, depending on the receiver)
Specs:
Size: 180*190*58
Faceplate: Carbon
Gimbal Type: Hall Sensor
Weight: 888g (without battery)
Working voltage: DC7-8.4V (NO CRSF)
Channels: up to 32 channels (depending on the receiver)
Display: IPS480*272 (800 * 480 HD IPS touch screen interface reserved - expected to be supported by openTX2.4 and above)
Simulator mode: 3.5mm standard ppm output or USB HID
Package Included:
- 1 x T18 PRO V2 radio
- 1 x Zipper case
- 1 x USB-C c
Ada masalah dengan produk ini?