Vigor AP 910C dual-band wireless access point Access Point

VigorAP 910C is a dual-band wireless access point designed for ceiling or wall mount. It supports stand-alone operation and can also integrate with DrayTek routers or VigorACS platform for central management.

Interface
LAN Port 1x PoE Gigabit Ethernet
Antenna 2x 2.4GHz Internal (2.8 dBi)
2x 5GHz Internal (4 dBi)
Button 1x Factory Reset Button

Capacity
2.4GHz Peak Speed 300 Mbps
5GHz Peak Speed 867 Mbps
Max. Number of Concurrent Active Clients 128 (64 per radio band)
WLAN
2.4GHz Standard IEEE 802.11b/g/n 2x2 MIMO
5GHz Standard IEEE 802.11a/n/ac 2x2 MIMO
2.4GHz Operating Mode AP, Universal Repeater, AP Bridge Point-to-Point, AP Bridge Point-to-Multipoint, AP Bridge WDS
5GHz Operating Mode AP, Universal Repeater, AP Bridge-WDS
Roaming AP-Assisted Roaming, PMK-Caching, Pre-Authentication

Security
Security Mode WEP, WPA, WPA2, Mixed(WPA+WPA2)
Authentication Pre-Shared Key, 802.1X
WPS PIN, PBC

Management
Local Service HTTP, HTTPS, Telnet
Configuration Stand Alone, TR-069 (VigorACS), VigorRouter APM
Firmware Upgrade HTTP, TFTP, TR-069
Tools Speed Test, AP Discovery, Statistics, DHCP Table, Interference Monitor
Notification Alert E-mail
SNMP v2, v2c, v3

Environment Indoor
Mounting Ceiling Mount / Wall Mount
Power Method DC 12V @1A / 802.3af/at PoE
Max. Power Consumption 10 watts
Dimension 176mm x 176mm x 30mm

Storage Temperature -20 to 60°C
Operating Humidity 10 to 90% non-condensing

AC1200
Delivers 867 Mbps at 5GHz,
300 Mbps at 2.4GHz

128 Active Users
At Maximum, 64 Per Radio

1 PoE LAN Port
10/100/1000M Base-T RJ-45

8 SSIDs
4 Per Radio, support 802.1q VLAN