Atur jumlah dan catatan
Stok Total: 299
Subtotal
Rp384.500
New Lem PC Fahrenheit 2 Oz Epoxy Putty Lem Anti Panas USA Berkualitas
Rp384.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Lem Dan Perekat
Selamat datang di toko kami budayakan membaca deskripsi produk ya kak
Brand PC
Material GLUE
Package Content 1 tube lem multifungsi
Specification
Isi 60 ml
Suhu 176C - 260C
Untuk memperbaiki besi, baja, pipa dna logam lainnya
Cocok untuk memperbaiki mesin mobil, motor, kapal dan lainnya
Here are just a few specific uses (there are hundreds of other uses):
Seal cracked steam or hot water radiator
Stop leaking steam fittings
Fill hole in heat exchanger
Attach thermocouple to hot surface
Seal chimney ductwork
How to prepare a surface for bonding with PC-Fahrenheit
Remove contaminants such as dust, dirt, oil and grime with a solvent such as denatured alcohol (ethanol), acetone, rubbing alcohol (isopropyl alcohol) or lacquer thinner. Mild detergent solution in water is also good removing contaminants. Use a clean paper towel or rag for wiping. Remove rust and loose paint with sandpaper or wire brush. Epoxy typically sticks to most paints. If there is a concern of the paint’s adhesion then remove it with sandpaper, wire brush or paint stripper. Smooth, glossy and shiny surfaces should be roughened using sandpaper to increase adhesion. Adhesion to wet or damp surfaces can be improved by wiping with alcohol. Do not use mineral spirits or paint thinner for removing contaminants.
How to clean-up after PC-Fahrenheit application
We recommend wearing disposable gloves when mixing and applying epoxy putty. Remove from skin with soap and warm water. Clean up mixed epoxy before it cures with paper towels and solvent. Denatured alcohol (ethanol), acetone, rubbing alcohol (isopropyl alcohol) or lacquer thinner are suitable solvents for removing uncured epoxy. Cured epoxy can be physically removed by prying off with a screw driver or pliers. It can also be removed with paint stripper or remover.
" WAJIB MEMBUAT VIDEO UNBOXING , TIDAK MENERIMA KLAIM TANPA VIDEO UNBOXING !! "
Brand PC
Material GLUE
Package Content 1 tube lem multifungsi
Specification
Isi 60 ml
Suhu 176C - 260C
Untuk memperbaiki besi, baja, pipa dna logam lainnya
Cocok untuk memperbaiki mesin mobil, motor, kapal dan lainnya
Here are just a few specific uses (there are hundreds of other uses):
Seal cracked steam or hot water radiator
Stop leaking steam fittings
Fill hole in heat exchanger
Attach thermocouple to hot surface
Seal chimney ductwork
How to prepare a surface for bonding with PC-Fahrenheit
Remove contaminants such as dust, dirt, oil and grime with a solvent such as denatured alcohol (ethanol), acetone, rubbing alcohol (isopropyl alcohol) or lacquer thinner. Mild detergent solution in water is also good removing contaminants. Use a clean paper towel or rag for wiping. Remove rust and loose paint with sandpaper or wire brush. Epoxy typically sticks to most paints. If there is a concern of the paint’s adhesion then remove it with sandpaper, wire brush or paint stripper. Smooth, glossy and shiny surfaces should be roughened using sandpaper to increase adhesion. Adhesion to wet or damp surfaces can be improved by wiping with alcohol. Do not use mineral spirits or paint thinner for removing contaminants.
How to clean-up after PC-Fahrenheit application
We recommend wearing disposable gloves when mixing and applying epoxy putty. Remove from skin with soap and warm water. Clean up mixed epoxy before it cures with paper towels and solvent. Denatured alcohol (ethanol), acetone, rubbing alcohol (isopropyl alcohol) or lacquer thinner are suitable solvents for removing uncured epoxy. Cured epoxy can be physically removed by prying off with a screw driver or pliers. It can also be removed with paint stripper or remover.
" WAJIB MEMBUAT VIDEO UNBOXING , TIDAK MENERIMA KLAIM TANPA VIDEO UNBOXING !! "
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan