CD4047 CD4047B CD4047BE Low Power Monostable Astable Multivibrator AZ2

CD4047 CD4047B CD4047BE Low Power Monostable Astable Multivibrator AZ29

Description:
The CD4047B is capable of operating in either the monostable or astable mode. It requires an external capacitor
(between pins 1 and 3) and an external resistor (between pins 2 and 3) to determine the output pulse width
in the monostable mode, and the output frequency in the astable mode.
Astable operation is enabled by a high level on the astable input or low level on the astable input. The output frequency (at 50% duty cycle) at Q and Q outputs is determined by the timing components. A frequency twice that of
Q is available at the Oscillator Output; a 50% duty cycle is not guaranteed.
Monostable operation is obtained when the device is triggered by LOW-to-HIGH transition at + trigger input or
HIGH-to-LOW transition at trigger input. The device can be retriggered by applying a simultaneous LOW-to-HIGH
transition to both the + trigger and retrigger inputs.
A high level on Reset input resets the outputs Q to LOW, Q to HIGH.

Feature:
Package/Case::PDIP-14
Supply Current - Max::0.02 mA
Propagation Delay Time::1000 ns, 450 ns, 300 ns
High Level Output Current::- 4.2 mA
Low Level Output Current::4.2 mA
Supply Voltage - Max::18 V
Supply Voltage - Min::3 V
Pd - Power Dissipation::500 mW
Maximum Operating Temperature::+ 125 C
Minimum Operating Temperature::- 55 C
Packaging::Tube
Brand::Texas Instruments
Height::4.57 mm
Length::19.3 mm
Mounting Style::Through Hole
Operating Supply Voltage::3.3 V, 5 V, 9 V, 12 V

Application:
Frequency discriminators
Timing circuits
Time-delay applications
Envelope detection
Frequency multiplication
Frequency division

Datasheet PDF:
http://pdfdatasheetcatalogcom/datasheets/560/...