ASAHI PVC VALVE TRUE UNION BALL VALVE JIS 2" DN 50 MATERIAL PVC/EPDM

Socket End To JIS / DN / ANSI 2 #34; Specifications Sizes: 1/2 #34; - 4 #34; *6 #34; end connections available for 4 #34; valve bodies PVC/EPDM/FKM Models NSF-61 Certified Models: PVC amp; CPVC: Socket, Threaded, and Flanged (ANSI) PP amp; PVDF: IPS and Metric (DIN) Socket, Threaded, Butt, and Flanged (ANSI) Bodies: PVC, CPVC, PP, and PVDF Seats: PTFE backed with EPDM or FKM Seals: EPDM or FKM or AFLAS FEATURES - Pressure rated up to 230psi (PVC, CPVC, PVDF) - Double O-ring seals on stem for added protection - Full bore, sizes 1/2 #34; – 2 #34; - Full vacuum rated, all sizes - Blocks in two directions, upstream and downstream, leaving full pressure on the opposite end of the valve - Integrally molded ISO mounting pad for both manual and actuated operations - Integrally molded base pad to mount valves securely or panel mounting - PTFE seats with elastomeric backing cushions ensure bubble tight shut-off and a low fixed torque, - - while at the same time compensating for wear - True union design for easier installation or repairs without expanding the pipe system - Built-in spanner wrench on the handle for valve disassembly and assembly - Two sets of end connectors (socket and threaded) included with all PVC and CPVC valves in sizes 1/2 2 #34; - CPVC threaded end connectors on sizes 1/2 #34; – 1 #34; come with stainless steel reinforcing rings - New PTFE seat design – Facilitates easier field maintenance if required - Tapered O-ring groove – Helps to keep the end connector O-rings on the valve body during installation - Body flats – Flats have been added to either side of the valve body where a wrench can be applied to prevent the valve body from turning when the union nuts are tightened - 1/2 #34; - 2 #34; PVC and CPVC T-21A design