Atur jumlah dan catatan
Stok Total: 123
Subtotal
Rp7.500
USB-Type-C to DIP 12 Pin Adapter Breakout-Board
Rp7.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
USB-Type-C to DIP 12 Pin Adapter Breakout-Board
Description:
The USB Type-C connector is intended to supersede a wide range of existing USB connectors.
It is reversible and can serve in both USB host and USB device roles, allowing either end of a cable to be plugged into a receptacle with either side up, and it can support negotiation of increased power and alternate uses of the USB interface wires.
The USB-C connectors 24 tightly-spaced pins make it difficult to use in a hobby project or prototype design.
This breakout board helps by providing access to the connectors pins for power (VBUS and GND), USB 2.0 differential data (D+ and D-), Configuration Channel and Sideband Use.
VCC Positive pole of power supply
SBU1 Sideband usage
SBU2 Sideband usage
DP1 USB 2.0 differential signal, position 1, positive
DP2 USB 2.0 differential signal, position 2, positive
CC1 Configure channels for identification and control
CC2 Configure channels for identification and control
DN1 USB 2.0 differential signal, position 1, negative
DN2 USB 2.0 differential signal, position 2, negative
GND Negative pole of power supply
Specifications:
Current:max. 3A
Base Material: FR4
Board Thickness: 1.6mm
Size: 17.6 * 21.5*5mm
Description:
The USB Type-C connector is intended to supersede a wide range of existing USB connectors.
It is reversible and can serve in both USB host and USB device roles, allowing either end of a cable to be plugged into a receptacle with either side up, and it can support negotiation of increased power and alternate uses of the USB interface wires.
The USB-C connectors 24 tightly-spaced pins make it difficult to use in a hobby project or prototype design.
This breakout board helps by providing access to the connectors pins for power (VBUS and GND), USB 2.0 differential data (D+ and D-), Configuration Channel and Sideband Use.
VCC Positive pole of power supply
SBU1 Sideband usage
SBU2 Sideband usage
DP1 USB 2.0 differential signal, position 1, positive
DP2 USB 2.0 differential signal, position 2, positive
CC1 Configure channels for identification and control
CC2 Configure channels for identification and control
DN1 USB 2.0 differential signal, position 1, negative
DN2 USB 2.0 differential signal, position 2, negative
GND Negative pole of power supply
Specifications:
Current:max. 3A
Base Material: FR4
Board Thickness: 1.6mm
Size: 17.6 * 21.5*5mm
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan