BARANG TERLARIS ROBOT Ez 3D Printed OpenCat / Hanya body full / printing 3d

Ez 3D Printed OpenCat / full body printing 3d Note : Hnya body saja full rangka lectronics and Hardware: a HuaDuino board, it is Arduino Nano compatible with enhanced features. It integrates everything on a single PCB. It #39;s a lot easier for people to make a bot with it. Embedded battery charging circuit, battery charging is more convenient. a single 3.7V 18650 lithium ion battery or a battery pack(2 in parallel) with XH2.54 connector, high C-rating is recommended. You may like to use our design 18650 battery holder. It #39;s placed onto the body chamber. 11 x Tower Pro SG90 or compatible 9g servos. Or 3 of SG90 for neck, head, tail and 8 of MG90s for legs. MG90s is metal gears, will be more durable. So it is highly recommended to use MG90s. a MPU-6050, places it to the orientation as shown on the photo. a buzzer, It #39;s placed onto the body chamber. a Bluetooth module - BT UART (such as HC-05/06, SPP-CA) or Bluetooth LE (such as HM-10,BT05) for commands sending over from serial console which can be a smart phone App or desktop/notebook computer program; set bluetooth module baud rate to 38400 a HC-SR04 ultrasound sensor, it is optional as it does not do useful function in the code, it is placed on the head, can take the eyes model as the replacement. dupoint wires about 12 of m2x6 tapping screws Sangat cocok untuk pembelajaran sekolah yang menyukai program arduino untuk ketersedian stock tanyakan terlebih dahulu. *Toko TERPERCAYA karena KUALITAS dan PACKING *Berkualitas Tinggi *Bukan Produk Murahan *Double-Checking Product *Packing AMAN *Jaminan 100% uang kembali jika Produk tidak sesuai foto dan deskripsi