Home Assistant Green SkyConnect USB Stick - compatible with Zigbee/Thread/Matter, ideal for Smart Home

Brand Name : cbhioarpd
Origin : Mainland China
Demo Board Type : ARM
Hign-concerned Chemical : None


PRODUCT DETAILS

Description
Zigbee/Matter/Thread USB Stick for Home Assistant

The Home Assistant SkyConnect is designed to be a perfect match for Home Assistant Users. The device provides an easy connection with Zigbee and will support Matter specifications in the future with a firmware update from Home Assistant. The product supports Over-The-Wire (OTW) Firmware Update via the USB interface, which allows easy and quick firmware updates for both protocols. The device is an EFR32 Series 2 (Silicon Labs EZSP v8) adapter that will transmit at a power of +20 dBm. The drive supports full-speed USB 2.0 when plugged into the included USB extender.
The hardware is based on a
Silicon Labs EFR32MG21

SoC with an IEEE 802.15.4 multi-protocol 2.4GHz radio MCU that is capable of concurrently running both Zigbee 3.0 (EmberZNet/EZSP) and Thread (OpenThread/Spinel inc. Matter/CHIP over Thread) stacks/protocols at the same time by using firmware in RCP RCP (Radio Co-Processor) mode. Direct local serial communication will be done via an onboard USB-to-UART bridge/converter (presumably a chip in Silicon Labs CP210x series).
Home Assistant will provide an Addon that will contact the Ember Stacks for Zigbee and Matter.Home Assistant will provide updates to the firmware on a consistent basis that will provide the best user experience from a Zigbee/Matter Adapter. The USB Stick will be Plug and Play, tightly integrated with the Zigbee Home Automation integration allowing for a beginner-friendly experience. For more information, please stay tuned for updates on
Home Assistant website

and our
discord Home Assistant channel
.

Features
Perfect match for Home Assistant Users:

easy connection with Zigbee and will support Matter specifications in the future with a firmware update from Home Assistant.

High performance, low power, and secure solutions:

powered by EFR32MG21 Wireless SoC, 2.4GHz Multi-Protocol USB Transceiver, supports full-speed USB 2.0 when plugged into the included USB extender.

Reliable communications:

transmits at a power of +20 dBm.

Runs 2 protocols simultaneously:

dual-protocol operation(Zigbee, Matter).

Consistent Firmware Updates:

Over-The-Wire (OTW) firmware update support.

Note
The SkyConnect will not run Matter immediately on launch but using Home Assistant the firmware will be updated to enable Matter when the firmware is finished being developed. This is due to Matter not being released until November and not all of the information being available. Home Assistant is already working on their Matter implementation but more information will come after November.
What is Home Assistant?
Home Assistant

is open-source home automation that prioritizes local control and privacy. Powered by a worldwide community of tinkerers and DIY enthusiasts, it is perfect to run on a Raspberry Pi, or Raspberry Pi Compute Module 4 powered
Home Assistant Yellow
, Seeed
reTerminal
, and mini router with dual gigabit ethernet, or a local server such as Seeed
Odyssey Blue

powered by Intel Celeron J4125. Home Assistant can be accessed via a web-based user interface, via companion apps for Android and iOS, or using voice commands via a supported virtual assistant like Google Assistant or Amazon Alexa. Home assistant enables the local control of smart home devices, offering better security, greater reliability, and more flexibility than many cloud-connected devices.

Specification
Supply

5V DC / up to 150mA

USB

v2.0 full speed (12Mbps)

Bridge

USB to UART, Silabs CP2102N

Transceiver

Silabs EFR32MG21

Frequency

2.4GHz

Antenna

PCB

TX Power

up to +20dBm

RX sensitivity

-104dBm (250kbps)

Protocols

Zigbee, Matter, Thread

Stack

EmberZNet Serial Protocol(EZSP)