AC 110V 120W Ultrasonic Generator Cleaning Machine Power Driver

The use of circuit board and shock transducer (ceramic chip transducer) is explained. 1. circuit boards must not be energized without load. 2. no cleaning fluid can be energized during cleaning. 3. the two connection pieces of the shock head can be divided into positive and negative ones. 4. Shake head welding power cord must be welded in two sier layer of one side, the other side is the vibration surface, can be pasted in the wash basin (this is the purchase of ceramic transducer components instructions); sier on the ceramic sheet can not withstand high temperature, soldering iron welding power cord temperature can not exceed the brim, the best use of constant temperature soldering iron, soldering iron temperature set Set it to 250 degrees. 5. The larger side of the shaker head (with a screw hole) can be adhered to the bottom of the cleaning container for the shaking surface. If the screw is welded by argon arc welding and glue is added, tighten it to the bottom of the steel plate. 6. there must be no gaps at the bottom. 7. circuit board size: 110X98mm (long X width) The positive and negative poles of the output are connected with the positive and negative poles of the seismon respectively, so they can not be mistaken. Style: AC110V 100W / AC220V 100W / 50W 40KHZ Material:plastic colour:Sier + Green / Sier Package Contents: 1 set * Power Driver / 1 * Power Driver