Kenika SCR 6048 Solar Charge Controler SCC MPPT 12 24 36 48 60 A

Dengan penggunaan Kenika solar charge controller, diharapkan akan didapat tenaga listrik yang maksimal dari sistem solar. Karena solar charge controller sangat berguna dalam melakukan pengontrolan pada sistem tenaga matahari (solar). Baik dari tegangan/arus yang masuk ke baterai penyimpan. Sehingga baterai bisa terawat dan terisi dengan baik.



Specifications:

MODEL SCR6048
MPPT Efficiency >99%
System Voltage 12V/24V/48V (Auto)
Dimension (W×D×H) 200×168×94mm
Box Dimension (W×D×H) 274×194×106mm
Nett Weight 1.8kg
Gross Weight 4kg
INPUT
Max. PV Input Voltage 170VDC
MPPT Operating Voltage Range 12V 18VDC - 150VDC
24V 34VDC - 150VDC
48V 65VDC - 150VDC
Low Voltage Protection 12V 16VDC
24V 30VDC
48V 60VDC
High-Voltage Protection 170VDC
PV Rated Input Power 12V 855W
24V 1710W
48V 3420W
DC LOAD OUTPUT
Load Voltage Same as Battery Voltage
Load Current 20A
Load Control Mode ON/OFF, PV Voltage Control, Time Control, PV + Time Control
CHARGE
Battery Type Sealed Lead Acid, Gel, Flooded, Lithium-Ion, User-Defined
Charging Mode MPPT (Maximum Power Point Tracking)
Charging Current 60A
Charging Method Three-Stage: CC (Constant Current) - CV (Constant Voltage) - CF (Float Charge)
Temperature Compensation -3mV/°C/2V (Default)
Float Charging Voltage (Lead Acid Default) 12V 13.8VDC (Settable)
24V 27.6VDC (Settable)
48V 55.2VDC (Settable)
Boost Charging Voltage (Lead Acid Default) 12V 14.5VDC (Settable)
24V 29.0VDC (Settable)
48V 58.0VDC (Settable)
SYSTEM
Protection Function Input Low/Over Voltage, Input/Output Polarity Reverse Connection, Short Circuit, Over Temperature, Battery Shedding, etc.
Display Touch LCD + LED
Cooling Method Forced Air Cooling
Standby Power < 2W
Communication RS485
ENVIRONMENT
Relative Humidity 0~90% RH (Non-Condensing)
Altitude < 3000m
Operating Temperature -20°C~+40°C
Storage Temperature -40°C~+75°C
Protection Level IP21