Atur jumlah dan catatan
Stok Total: 100
Subtotal
Rp16.000.000
LUTRON LQSE-4A5-230-D PRO LED+ Phase Adaptive Power Module
Rp16.000.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Specifications
Phase Adaptive Power Module Power
• 220 - 240 V~ 50/60 Hz
• 10 A maximum total input current.
• Standby power: 3.5 W typical
• Lightning strike protection meets ANSI/IEEE standard 62.31-1980. Can withstand voltage surges of up to 6000 V and current surges of up to 3000 A.
• Contact Lutron for applications where the electrical distribution system does not have a connection to earth, an IT network per IEC 60364, such as an ungrounded Delta feed. Regulatory Approvals
• Lutron Quality Systems registered to ISO 9001.2015 • RoHS Compliant
• CE marked • UKCA marked • Rated for 150 W of LEDi per IEC 60669 Environment • See Mounting on page 6 for thermal specifications. • Relative humidity: less than 90% non-condensing. • For indoor use only. Output Zone Ratings • Each zone has no minimum load requirement. • When programmed to "auto detect" mode, the module starts in reverse-phase (trailing-edge) and if an incompatible load is detected, it will convert to forward-phase (leading-edge). • Internal relay provides an air gap off when all zones are off. • One load type per zone. • Output must not be used to control general purpose receptacles.
Phase Adaptive Power Module Power
• 220 - 240 V~ 50/60 Hz
• 10 A maximum total input current.
• Standby power: 3.5 W typical
• Lightning strike protection meets ANSI/IEEE standard 62.31-1980. Can withstand voltage surges of up to 6000 V and current surges of up to 3000 A.
• Contact Lutron for applications where the electrical distribution system does not have a connection to earth, an IT network per IEC 60364, such as an ungrounded Delta feed. Regulatory Approvals
• Lutron Quality Systems registered to ISO 9001.2015 • RoHS Compliant
• CE marked • UKCA marked • Rated for 150 W of LEDi per IEC 60669 Environment • See Mounting on page 6 for thermal specifications. • Relative humidity: less than 90% non-condensing. • For indoor use only. Output Zone Ratings • Each zone has no minimum load requirement. • When programmed to "auto detect" mode, the module starts in reverse-phase (trailing-edge) and if an incompatible load is detected, it will convert to forward-phase (leading-edge). • Internal relay provides an air gap off when all zones are off. • One load type per zone. • Output must not be used to control general purpose receptacles.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan