Ecowitt HP2564 Wittboy Pro Weather Station, Includes HP2560_C TFT Display Console and WS90 Outdoor Solar Powered Weather Sensor

Selamat Datang Di Toko Kami,
JIka Ada Pertanyaan Terkait Produk Jangan Ragu Chat Kami ya :)

Brand Name : ECOWITT
Model Number : Wittboy Pro HP2564
Usage : outdoor
Origin : Mainland China
Theory : Frequency
Certification : CE,FCC
Style : Standing Station
Display Size : 7 Inches & Above
Display Type : DIGITAL
Max Measuring Temperature : 50C - 69C
Is Smart Device : YES
Hign-concerned Chemical : none
HP2560 Alarm Duration : 120 seconds


Ecowitt HP2564 Wittboy Pro Weather Station, Includes HP2560 TFT Display Console and WS90 Outdoor Solar Powered Weather Sensor

All-in-1 WS90 Outdoor Weather Sensor Array :

Temperature, humidity, wind direction/speed, light and UV levels and Haptic Rainfall Sensor(More accuracy Anti-vibration design).

Haptic Rainfall Sensor

Compared with traditional rain gauge sensor, WS90 outdoor sensor is equipped with a Haptic Rainfall Sensor at the top that accurately measures rainfall volume in detail: featuring rain detection and rain stop interpretation functions. This special sensor does not vibrate, it is not affected even by harsh weather conditions, and its designed to keep working with accuracy in any context.

Slope Design

The top of haptic rain gauge has been added a slope.
Accumulated water at the top of the piezoelectric sensor can be influenced by wind,
leading to potential misjudgments regarding rainfall. After our modifications and validation, this slope proves advantageous for accurately identifying precipitation status.

Attention

1.About daily rain deviation

The daily rain deviation of WS90 is very small in the long run, but under certain conditions the deviation can be larger: as the rain drop size and wind speed can have different impacts on the sensor output which lead to this variance. The WS90 product suffer from this imperfectness. If you are very

demanding on rain data accuracy, we suggest you buy WH40 and use it together with WS90. If there is no precise requirement on data of each rain,

then WS90 is just fine: After all the device works well after a longer run time.

(Daily rain deviation for WH40 and WS90)

2. How to calibrate WS90

The WS90 is equipped with a haptic rain sensor, and the system offered a way that users can calibrate the rain sensor accuracy by themselves. To carry out a proper calibration, please check the following:

1. A reference will be needed to record the rainfall value, and also it is quite important to have the ability to record the rain rate. For this, our WH40 rain sensor can be used for this purpose.

2. There are five rain gain parameters you can set: Piezo Rain1: Rain5. So usually, we leave Rain1 as it is unless you can confirm it made constantly same result, and then you can adjust this.

3. Have rain data recorded, like this: we set rain4 gain to 6/7.5 = 0.8. For easier handling, you can set rain2:rain3:rain5 all the 0.8 for the time being. Only when different rain rates are recorded, you have the WS90 rain divided by 0.8 to get 1.0 rain, and then have the (reference/WS90/0.8) calculated again, and fill up the corresponding rain gain setting precisely.

(Rainfall values recorded for WH40 and WS90)

(Set five rain gain parameters)

Dual-Power Supply & Auto-Heater Function

Sensor solar panel (built-in): 6.5V/4mA

Sensor (backup): 2 x AA 1.5V battery (not included)

Equipped with a built-in solar panel on the top to charge super CAP to ensure night use, your very own weather station has the advantage of being a solar-powered device, Wherever you place it outdoors, you dont need to charge it or even worry about it. Its solar panel will take care of keeping WittBoy running at full power and, in case of prolonged rainy days, its backup batteries will kick in to maintain its functionality.

WS90 equips a built-in thermostat heating plate, The heat plate will automatically turn on below 5C (40F) and automatically turns off above 10C (50F), the heat plate will melt snow and ice and keep its anemometer working as usual.

About the Extension Power Cord(Sold Separately):

The external power cord
(

Sold separately, click here

)

can both
heat

and act as a
power supply

, but please note the following points:

1. We recommend our customers use a
12V

power supply because there is a heating plate inside the battery compartment of WS90, the purpose of the heating plate is to melt the snow covering the battery compartment (snow will affect the wind speed measurement).

Moreover, with a 12V power supply, the power cable can be stretched longer.

2. If you don't need to supply power from a distance, you can also use a 5V power supply, but it will cause the heating plate to be inefficient and melt the snow slower.

3.

Be sure to pay attention!!! The supply voltage range can only be

5~20V

, more than that will be very dangerous and will cause damage to the WS90.

About the Snowpack

For the topmost snow


, it can't be heated and melted by the heating plate(cause there's no heating plate on the top), which can only