Atur jumlah dan catatan
Stok Total: 100
Subtotal
Rp7.751.000
Alger-keys USB Dongle PCM FLASH BITBOX MMC Flash combiloader J2534 ECU Chip-tuning scanmatik 2 PRO
Rp7.751.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Selamat Datang Di Toko Kami,
JIka Ada Pertanyaan Terkait Produk Jangan Ragu Chat Kami ya :)
Origin : Mainland China
Hign-concerned Chemical : None
Before purchasing a dongle: Please contact customer service or +Wasap +86
You need both the dongle (basic equipment) and at least one module at the initial purchase. The modules will not work without a dongle.
If you need any other modules, please contact customer service, or check other dongle links in the store. All modules are in stock.
Hi, This product only includes all original hardware displayed in the accessories, not software.
Product origin: Russia.
Only supports English and Russian
If need, please contact customer service.
Please note: The purchase of dongle must be accompanied by the purchase of one of the module authorization services
We will send the one that is in stock by default. PCMflash is an integrated software solution intended for reprogramming ECUs and TCUs of Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus and other vehicles. There are universal modules Denso SH705x Bootloader and BSL TriCore. It supports work via ADS adapter (version 1, not for all ECUs) as well as via any J2534-compatible adapter if there are appropriate drivers and libraries. The tool has been tested with OpenPort 2.0, Mongoose JLR, MongoosePro JLR, Teradyne GNA600 (VCM 1), Mazda VCM 2.
The software is marketed on a module basis and has simple and clear interface. The Guardant dongle is used for the protection from unauthorized access. It supports flashing both backup (vbf) and binary (bin) files. When flashing binary files checksum verification and correction is available for most of the modules. Conversion from VBF/GDS into BIN is supported if the ECU doesnt support reading. Most modules support checksum verification and correction as well as VID transfer (if needed) while flashing binary files.
The USB dongle needs to be linked to a PC. The authorization process requires Internet connection at the first attempt to work with an ECU. The dongle can be used on several computers.
Technical support is porvided by the developer directly.
Attention! In case of the dongle loss, the module transfer is not possible. You have to buy a dongle and software again.
We do not provide pinouts.
NB! Modules may not be activated at weekends and on public holidays.
Please note the modules cannot be deactivated. If you provide the wrong dongle number, no refund will be possible.
JIka Ada Pertanyaan Terkait Produk Jangan Ragu Chat Kami ya :)
Origin : Mainland China
Hign-concerned Chemical : None
Before purchasing a dongle: Please contact customer service or +Wasap +86
You need both the dongle (basic equipment) and at least one module at the initial purchase. The modules will not work without a dongle.
If you need any other modules, please contact customer service, or check other dongle links in the store. All modules are in stock.
Hi, This product only includes all original hardware displayed in the accessories, not software.
Product origin: Russia.
Only supports English and Russian
If need, please contact customer service.
Please note: The purchase of dongle must be accompanied by the purchase of one of the module authorization services
We will send the one that is in stock by default. PCMflash is an integrated software solution intended for reprogramming ECUs and TCUs of Volkswagen, Skoda, Ford, Mazda, Mitsubishi, Nissan/Infiniti, Subaru, Honda/Acura, Hyundai/Kia, Renault, Toyota/Lexus and other vehicles. There are universal modules Denso SH705x Bootloader and BSL TriCore. It supports work via ADS adapter (version 1, not for all ECUs) as well as via any J2534-compatible adapter if there are appropriate drivers and libraries. The tool has been tested with OpenPort 2.0, Mongoose JLR, MongoosePro JLR, Teradyne GNA600 (VCM 1), Mazda VCM 2.
The software is marketed on a module basis and has simple and clear interface. The Guardant dongle is used for the protection from unauthorized access. It supports flashing both backup (vbf) and binary (bin) files. When flashing binary files checksum verification and correction is available for most of the modules. Conversion from VBF/GDS into BIN is supported if the ECU doesnt support reading. Most modules support checksum verification and correction as well as VID transfer (if needed) while flashing binary files.
The USB dongle needs to be linked to a PC. The authorization process requires Internet connection at the first attempt to work with an ECU. The dongle can be used on several computers.
Technical support is porvided by the developer directly.
Attention! In case of the dongle loss, the module transfer is not possible. You have to buy a dongle and software again.
We do not provide pinouts.
NB! Modules may not be activated at weekends and on public holidays.
Please note the modules cannot be deactivated. If you provide the wrong dongle number, no refund will be possible.
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan