Neo CO2 Diffuser Extend Special S Aquario

The Aquario NEO CO2 Diffusor Extended Special Type is an acrylic CO2 Diffusor with an extra long pipe which can be individualized very easily by a special heat technique. Dangling around hoses disappear from your aquarium tank #39;s surrounding and your whole aquarium setup looks organized and tidier than before. The special ceramic membrane produces a fine mist and the CO2 gets dissolved very quickly. The diffusor itself is very narrow and connects to the pipe at its side. DIMENSIONS: Aquario NEO - CO2 Diffusor - Extended Special S Height 390 mm Width 24 mm Membrane diameter 12 mm Fits hose 6/4 mm APPLICATION: • Insert the enclosed rubber strip into the acrylic pipe. • Heat the pipe with a lighter while rotating at a distance of 1-3 cm. • As soon as the acrylic material is softend it can be curved. • The beforehand inserted rubber strip minimizes the chance of reducing the inner diameter of the pipe. It can now be removed. • For finest bubbles it is advisable to put the diffusor into water for 10 minutes, so that all membrane pores get soked completely. • If the bubbles get bigger with time, you can clean the membrane with bleach. You will find a detailed describtion below. TIPS FOR APPLICATION: • If the flame is too close to the pipe it will get black from soot. Please keep the distance named above. • If the pipe is not rotated while heating, the bend will appear unattractive and have overlapping material inside the curve. • As soon as the material is softened, it is advisable to act firm and quickly to prevent the material from cooling while adjusting. • When aiming at a 180° curve, it is best to move the flame back and forth for a while in order to get a larger soft acrylic area. • If you want to bend the pipe around your aquarium tank #39;s wall, you do not necessarily need two bends. Just make use of a 180° curve and hold both pipe ends very tightly to the wall. The 180° will slowly expand adequadly.