Atur jumlah dan catatan
Stok Total: 500
Subtotal
Rp1.332.000
SID NEW TORO 5 Pneumatic Sanders 10000RPM Random Orbital Sander
Rp1.332.000
- Kondisi: Baru
- Waktu Preorder: 30 Hari
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
*WAJIB baca Deskrispsi Sblm Order
*Semua Barang Express-PO, Estimasi 7-10hari saja
*Tulis varian pd catatan
*Stock ribuan
*Klaim Garansi/Komplain WAJIB sertakan Video unboxing & foto lengkap resi.
TORO 5'' Pneumatic Sanders 10000RPM Random Orbital Sander Polishers
Specifications:
No-load Speed: 10000 RPM
Air inlet Size: 1/4'' NPT
Working Pressure: 90PSI
Air Consumption: 16 SCFM
Features:
- 5 inch small size, suitable for a variety of angles working.
- 10000RPM high speed, with good grinding efficiency.
- Low noise, powerful vacuum effect, use it for a long time without fatigue.
Pad Size: 5 Inch
Free Speed: 10000 RPM
Air Flow: 16 S CFM, 453 LPM
Air Pressure: 90PSI, 6.3 BAR
Air Inlet: 1/4'' NPT
Recommended Hose Size ID: 1/4in / 6.0mm
Precautions:
- This tool should only be used for the intended use it was designed for. If this tool produces an unusual sound or vibration stop and service by a competent repair person.
- Test and operate this tool at 90 PSI(6.2 BAR) maximum. Always use an airline filter / regulator / lubricator.
- Always wear goggles or face shield when operating this tool.
Application:
- For the surface grinding of iron, wood, plastic, tire.
- For fine polishing of ship, car, and the aviation industry.
- For removing th
*Semua Barang Express-PO, Estimasi 7-10hari saja
*Tulis varian pd catatan
*Stock ribuan
*Klaim Garansi/Komplain WAJIB sertakan Video unboxing & foto lengkap resi.
TORO 5'' Pneumatic Sanders 10000RPM Random Orbital Sander Polishers
Specifications:
No-load Speed: 10000 RPM
Air inlet Size: 1/4'' NPT
Working Pressure: 90PSI
Air Consumption: 16 SCFM
Features:
- 5 inch small size, suitable for a variety of angles working.
- 10000RPM high speed, with good grinding efficiency.
- Low noise, powerful vacuum effect, use it for a long time without fatigue.
Pad Size: 5 Inch
Free Speed: 10000 RPM
Air Flow: 16 S CFM, 453 LPM
Air Pressure: 90PSI, 6.3 BAR
Air Inlet: 1/4'' NPT
Recommended Hose Size ID: 1/4in / 6.0mm
Precautions:
- This tool should only be used for the intended use it was designed for. If this tool produces an unusual sound or vibration stop and service by a competent repair person.
- Test and operate this tool at 90 PSI(6.2 BAR) maximum. Always use an airline filter / regulator / lubricator.
- Always wear goggles or face shield when operating this tool.
Application:
- For the surface grinding of iron, wood, plastic, tire.
- For fine polishing of ship, car, and the aviation industry.
- For removing th
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan