Loctite 587 Sealant Flange Food Grade Isi 300ml Technology Silicone

Loctite 587 Sealant Flange Food Grade

Isi 300ml

Technology Silicone
Chemical Type Oxime silicone
Appearance (uncured) Metallic blue pasteLMS
Components One component -
requires no mixing
Thixotropic Reduced migration
of liquid product after
application to substrate
Cure Room temperature vulcanizing (RTV)
Application Gasketing or Sealing
Flexibility Enhances load bearing & shock
absorbing characteristics of the bond
area.
Specific Application Gasket replacement or Gasket
dressing
Specific Benefit Excellent resistance to automotive
engine oils and Adheres to a wide
range used for gasketing and sealing
applications for both plant maintenance and small, medium,
and large-sized OEM. As a formed-in-place gasket/sealant,
has been designed to give outstanding
performance in typical automotive gasketing applications
including valve covers, rocker covers, oil pans, water pumps,
end seals, intake manifolds, and rear axle housings. Excellent
adhesive for bonding and repairing fabricated silicone gaskets.
This product is typically used in applications up to 260 C.
NSF International
Registered to NSF Category P1 for use as a sealant where
there is no possibilty of food contact in and around food
processing areas. Note: This is a regional approval. Please
contact your local Technical Service Center for more
information and clarification.
UL Classification
Classified by Underwriters Laboratories Inc. E257711 -
Plastics & Components. Please visit the UL website for
additional information. Note: This is a regional approval.
Please contact your local Technical Service Center for more
information and clarification
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 C 1.28 to 1.33LMS
Extrusion Rate, g/min:
Pressure 0.62 MPa, time 15 seconds, temperature 25 C:
Semco Cartridge 250 to 600LMS
Flow, ISO 7390, mm:
After 2 minutes @ 25 C 12.7LMS
Flash Point - See SDS
TYPICAL CURING PERFORMANCE
Surface Cure