5.0/ 5.0
100% pembeli merasa puas
74 rating • 25 ulasan
5(74)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok: Tidak Dijual
Subtotal
-
MicoAir M10G-5883 M10 GPS with Compass QMC5883L FPV Drone 20x20
Rp209.999
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
M10G-5883 GNSS module integrates the u-blox 10th generation receiver chip – M10050, and the magnetic sensor – QMC5883L. It supports all L1 GNSS signals (GPS/GLONASS/Galieo/BeiDou) and can use up to 32 satellites simultaneously for navigation.
The high-gain 18 x 18 x 4mm patch antenna provides the best balance between performance and small size.
Built-in flash, parameters can still be saved when module lost power.
GNSS u-blox M10050 (GPS, GLONASS, Galileo and BeiDou)
Magnetic Compass QMC5883L
Patch antenna 18*18*4mm
Input voltage range: 5V
Concurrent: 30mA
Max Navigation rate: 5Hz
Max satelite num: 32
UART baudrate: 115200 default
Output Protocol: UBX-PVT(default)
PPS LED: Blue (Solid ON after powering on, blinking(1Hz) when GNSS get 3D fix)
UART(TX, RX) interface for M10050
I2C(DA, CL) interface for Compass QMC5883L
Dimensions: 20 x 20 x 7.8 mm
Weight: 7g
Connector: SH1.0-6P 1.0mm pitch
The high-gain 18 x 18 x 4mm patch antenna provides the best balance between performance and small size.
Built-in flash, parameters can still be saved when module lost power.
GNSS u-blox M10050 (GPS, GLONASS, Galileo and BeiDou)
Magnetic Compass QMC5883L
Patch antenna 18*18*4mm
Input voltage range: 5V
Concurrent: 30mA
Max Navigation rate: 5Hz
Max satelite num: 32
UART baudrate: 115200 default
Output Protocol: UBX-PVT(default)
PPS LED: Blue (Solid ON after powering on, blinking(1Hz) when GNSS get 3D fix)
UART(TX, RX) interface for M10050
I2C(DA, CL) interface for Compass QMC5883L
Dimensions: 20 x 20 x 7.8 mm
Weight: 7g
Connector: SH1.0-6P 1.0mm pitch
Ada masalah dengan produk ini?