ANCEL BST600 12V/24V Automotive Battery Temperature Load Tester

and high voltage protection prevent user from damaging the instrument in case of malfunction. 3) Real-time display and supports for 10 languages. 4) With data storage, previously measured data can be reviewed at any time. 5) The testing standards conform to most of the battery standards in the world. ANCEL BST600 12V 24V BATTERY ANALYZER WITH PRINTER 1. Tests 12V & 24V battery, cranking system, and charging system. 2. Test Multiple Battery Types: Regular flooded, AGM flat plate, AGM spiral, Gel and EFB; 3. Supports all battery rating systems - CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB. 4. Test result: Status of health (SOH), Status of charge (SOC), Measure CCA value, Battery temperature, Voltage, internal resistance, Ripple Test, load test,Data Review,Print Test Report. Displays test result in merely seconds, more accurate than the low-priced tester. 5. Tests in-vehicle battery and single storage battery. 6. Quick starter analysis without disabling the ignition. 7. Easy to use and read with large backlight LCD display and menu-driven operation. 8. Support languages: English,Deutsch ,Italiano,francais,Espanol,polski,русский,Nederlands,Japan and More Engine System Activation Load Test Start the engine to make the tester record the lowest voltage in this process automatically. For the 12V system, the standard voltage is 9.6V; for 24V system, the standard voltage is 16V. If the lowest voltage is higher than the 9.6V (for the 24V system, the lowest voltage is over 16V), the system is good. If the lowest voltage is lower than the standard voltage, the system is not good. MUTI-LANGUAGE OPTIONS: English,Spanish,Japan,Deutsch,Polski,Chinese,Italiano,Russian,Francais,Nederlands