TB6600 4A 9-42V Driver Controller with Nema 17 Bipolar 1.7A 40N.Cm

Model Number : Stepper motor driver Item Type : Hardware Parts/Machine Parts Brand Name : PULUZ Origin : Mainland China Motor Driver: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current. Motor Driver: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.The largest 32 subdivision of the 6 models are optional. : 40Ncm holding ; Rated current 1.7A and resistance 1.5ohms; 1.8 deg. step angle; bipolar 4-wire. Tips:Please make the motor connect to a constant current or chopper drive controller you test motor.Connecting the motor directly to a power supply will destroy the motor.Only the clock signal can be two-phase bipolar to achieve low vibration, high efficiency work. TB6600 Driver: Single chip bipolar sine microstep driver. New BiCD 0.13 nm process.Up to 42V. 5 subdivision mode (1/1,1/2,1/4,1/8,1/16,1/32). Output current:IOUT=4.0A(,in 100ms). rated output:IOUT=3.5 A Resistance(a+)=0.4 Alarm output pin current:Ialert=1mA Monitoring output pin(MO):Imo=1mA Break through the ,single power supply. Built in overheating protection(TSD)circuit. Undervoltage protection,built-in(UVLO)circuit. Built-in overcurrent detection(ISD),circuit. Can control 2 phase forward and reverse rotation,With 1-2,W1 -2,2W1 -2,4W1 -2 phase excitation mode. Nema 17 : Motor type:Bipolar Stepper Phase Resistance:1.5Ohm Phase Inductance:2.8mH Detent :2.2N.cm Inertia:54g.cm2 Holding :40N.cm Step angle:1.8 deg Motor Weight:280g Step angle accuracy:+ -5%(full step,not load) Resistance accuracy:+ -10% Inductance accuracy:+ -20% Temperature rise:80deg Max(rated current,2 phase on