1pc Integrated digital hybrid servo system 1.5Nm 2Nm 3Nm 4.2A 32-bit DSP prevent out-of-step close loop stepper motor

1pc Integrated digital hybrid servo system 1.5Nm 2Nm 3Nm 4.2A 32-bit DSP prevent out-of-step close loop stepper motor 1005003692859314 Pre-Order +/- Sampai Alamat 10-15 Hari FREE ONGKIR+PAJAK Garansi uang kembali jika Rusak, Beda Produk Current / Phase : 4.2A Holding Torque : 1.5Nm 2Nm 3Nm Step Angle(degrees) : 1.8 Phase : 2 Model Number : JSS57-1.5 JSS57-2.2 JSS57-3 Type : HYBRID Certification : NONE Origin : Mainland China Certification : NONE Please note : Picture just as a reference.the actual delivered goods shall prevail ! Specification: Adopt advanced 32-bit motor control dedicated DSP chip and vector closed-loop control technology The default work is in closed loop mode, no loss of step, and it also supports working in open loop mode. Increase the output torque and running speed of the motor The current level is intelligently adjusted according to the load, reducing the temperature rise of the motor, locking the current, and adjusting the closed-loop peak current. Adapt to various mechanical load conditions (including low-rigidity loads such as pulleys and pulleys) without adjusting the gain parameters. The position command smoothing filter can be set, the motor runs smoother, the vibration is lighter, and the acceleration and deceleration dynamic performance is improved. Zero-speed static capability without vibration after positioning Support single and double pulse input, pulse response frequency up to 200KHZ Support 15 fixed subdivisions, and support software to set any subdivision (200~65535) Support modbus RTU protocol on RS232, position and speed control controlled by communication Support monitoring of motor operating conditions, including speed, position deviation, bus voltage, operating current, etc. Voltage range: DC+24V~48V With overcurrent, overvoltage, pos