Raspberry Pi Camera 5MP OV5647 Lensa Wide Angle for Pi 3B 3B+ Zero W

Introduction : This is the fish eye lens camera module for Raspberry Pi. The angle of lens is 130 degree and focal can be adjusted. Feature: 1. Fish eye wide angle 130 degree lens 2. 5 MP pixel 3. Support 1080P resolution Specifications: 1. 5 megapixelOV5647 sensor 2. CCD size : 1/4inch 3. Sensor best resolution : 1080p 4. 4 screw holes:used for attachment ,connect 3.3V power output 5. Focal length : 2.1 6. Diagonal angle : 220 degree 7. Dimension: 25mm x 24mm How to use Raspberry Pi Camera 1. Install Raspbian system into SD card and insert to Raspberry Pi, connect the display to Raspberry Pi, Connect the camera to Raspberry Pi correctly. 2. Open the terminal and run sudo raspi-config 3. Choose the Interface--Enable Camera , enter it , then it the Raspberry Pi will restart automatically ( if not , you can restart it by yourself) Open the terminal again , run raspistill t 5000 o test.jpg then the camera will be on.The 5000means the camera will open 5 seconds , the test is the name of picture , you can change them as your need. Package list : 1 x Fisheye Camera 1 x 15 cm Flate Cable