melting point tester RY-1G melting point detector reagent compound

Ready stok!! RY-IG Melting point tester is suitable for the determination of the melting point of the compound. Using solid heating mode according to the unbalanced temperature guiding principle to select the heating rate measurement, it has the characteristics of convenient use, accurate measurement, the heating rate can be selected, small volume, convenient operation and safety are not easy to damage. It is an ideal laboratory equipment for industrial and mining enterprises, universities and research institutes. Technical index Measuring range:50-270C Measurement accuracy:1C Supply voltage:220V 50Hz The outer diameter of the sample tube shall be less than1.5Mm Long.60Mm Sample height2-3Mm The user can carry out the sample according to the industry. The correction of the thermometer is a necessary condition to measure the accurate result. RY-IGMelting point tester at room temperature20The accuracy of the measurement is the highest at. When the room temperature is too low or too high, the heating rate can be adjusted by increasing or decreasing the voltage. The instrument optical system used in the light source part is cold light source of semiconductor devices, has the advantages of low power consumption, strong light, long life and other characteristics, such as the case of light damage to the device to replace first disconnect the power line, then unscrew the source sheath (threaded, counterclockwise) then the light source device with a small electric iron wire will take off open, as is welded on the new light check whether each correct, connected to the power supply, open the switch such as no lights, first disconnect the power line in the replacement of two solder joints (wiring as the light emitting diode with positive and negative electrode) and then open the power source is Chang Faguang, disconnect the power line as it can be assembled normal use.