BELDEN 50106U KABEL UTP OUTDOOR CAT.6 305M ORIGINAL

50106U BELDEN Industrial Unshielded Cable UTP Cat. 6 1000FT 305m / Reel
Industrial Ethernet cables used in interconnecting Industrial Ethernet Switches, IP controllers, media convertors, distributed control system, programmable logic controller and transmitting industrial protocol data signals. These cables are suitable for transmitting 1000BASE‐TX Gigabit Ethernet, 100BASE‐T Fast Ethernet, 100BaseVG ANYLAN, 155ATM, 622ATM, RS‐422, 250MHz Category 6, EtherCAT. These are highly durable & ruggedized cables for both indoor and outdoor use meeting IEC 60332‐3‐25 Category D flame rating.

Physical Characteristics Electrical Characteristics
Conductor Size 23 AWG    Max. Conductor DCR @ 20°C 9.38 Ω/100m
Conductor Material Solid Bare Copper    Characteristic Impedance 100 ± 15  Ω 
Insulation Material PO ‐ Polyolefin    Nom. Mutual Capacitance @
1KHz 5.6 nF/100m
Number of Pairs 4 Pairs    Max. Capacitance Unbalance 330 pF/100m
Shielding Aluminium Foil – Polyester
Tape with TC drain wire Nom. Velocity of Propagation 70%
Jacket Material PVC ‐Polyvinylchloride    Max. Intended Operating
Voltage Rating ‐ UL 300 V
Suitability Indoor and Outdoor    Max. Delay @ 100MHz 538 ns/100m
UV/Sun Light Resistance Yes Max. Delay Skew 45 ns/100m
Oil Resistance Yes    DCR Unbalance @ 20°C Max. 5%
Flame Retardant IEC 60332‐3‐25 Category D
UL 1685 UL Loading
Mechanical Characteristics
Operating Temperature Range  ‐20°C To +75°C
UL Specification CM    Bulk Cable Weight 62 kg/km
Other Specifications ISO/IEC 11801 Class E
TIA/EIA 568‐C.2 Category 6
Max. Recommended Pulling
Tension 110 N
Nom. Diameter   7.5 mm    Min. Bending Radius (Install) 60 mm