ESSER HONEYWELL IQ8Control C MCFA Fire Alarm Panel 2 Loop

Deskripsi :
The IQ8Control C is an efficient fire alarm control panel for the property supervision of small to
mid-sized objects facilitates simultaneous detection, control and alarm signaling both on the analog
ring as well as on the spur.
Within the multi-functional IQ8Control C panel, the operation type (powered-loop or non-poweredloop) can be selected via a jumper located on the control panel power supply unit.
Depending on which loop operation type has been selected, the corresponding loop module/
modules are required.

Features :
• Max. two micromodules (system supports up to 254 digital loop addresses in total)
• Max. two esserbus analog loop modules
• Short circuit and open circuit resistant loop operation
• Loop installation with I-Y(ST)Y 0.8 mm cable for a maximum length of 3.5 km
• Up to 127 esserbus devices (fire detectors and/or manual call points)/detector zones per loop
• Up to 32 esserbus transponders per loop/operation of wireless components
• Operation types TM and PM as per DIN VDE 0833 - 2 to avoid unwanted alarms being triggered
• Fire brigade operating panel and alarm transmission unit interface on the peripheral module
• Three common relays, freely programmable, monitored, floating for up to 24 V DC/1A (on the
peripheral module)
• TTY or RS 485, RS 232 interface
• Integration in the short circuit and open circuit resistant essernet network with up to 31 fire detection panels depends on transmission rate
• Connection to graphical supervisor FlexES Guard/WINMAG via serial essernet interface (SEI)
• Operating panel with alphanumerical display
• Large LCD display with 8 rows x 40 characters
• Event memory for up to 10,000 events
• All System 8000 micromodules are compatible
• Printer interface for internal printer
• Monitored input for external power supply unit

Catatan :
1. SELAMA BARANG MASIH TERDISPLAY DI SINI = READY STOCKS.
2. HARGA TERMASUK PPN 10% DAN BISA TERBITKAN FAKTUR
3. GAMBAR HANYA ILUSTRASI BARANG