Solar Panel Module Aluminum Bracket Rail Adjustable Z Bracket

SEMUA BARANG DIKIRIM DARI LUAR NEGERI PROSES PENGIRIMAN (PRE-ORDER) -+14 HARI HARGA YANG DIBAYARKAN DIPEDIA SUDAH TERMASUK BIAYA SHIPPING DAN PAJAK BEA CUKAI Model Number : Solar Panel Photovoltaic Bracket Clamp Origin : Mainland China Solar Panel Module Aluminum Bracket Rail Adjustable Z Bracket Fastening Rail Trapezoidal Roof Mount Solar Power Parts Features: * brand new and high quality *Application: T20 short rail for trapezoidal sheet PV mounting. on walkable trapezoidal sheet metal roofs with sheet metal outer skin. *Material T20 profiles: aluminum alloy AL6005-T5, 1.00 KN *Requirement - trapezoidal sheet minimum sheet thickness steel 0.5mm / aluminum 1.00mm. *Good static load distribution. This type of installation reduces the suction effect on the outer skin of the roof covering by the weight of the PV system. *No transport of long profile bars - adjusted to the bead spacing of the profile sheets. *The profile sections are pre-punched and covered with sealing tape. Assembly 1. Roof division depending on module dimensions 2. Align the first row using a chalk line. 3. Place the T20 holder in position, pre-drill with a 5.00 mm sheet metal drill and fasten with 4 blind rivets. Alternatively: fasten with thin sheet metal screws without pre-drilling. 4. Place the next rows using a wooden template. After 10 rows check the direction again with a piece of string. Details: *Material: Aluminum alloy *Color:silver Style: 2x rails + 2x middle clamp 4x rails + 4x end clips Rail Size: 200mm Middle clip: for solar panel 30mm, for solar panel 35mm End clip: for solar panel 30mm, for solar panel 35mm NoteMiddle clips and end clips purchase the corresponding size set according to the thickness of your solar panel Package Contents: 2x Railswith accessories Gasket+Screw+ 2x middle clamp Or 4x Rails with accessories Gasket+Screw+ 4x end clamps Note: 1. The real