433Mhz Remote Control Code Grabber For Gate Wireless RF 4 Channel

Brand Name : Iremotemaster 433Mhz Remote Control Code Grabber For Gate Wireless RF 4 Channel Electric Cloning For Gate Garage Door Car Keychain Wholesales/Bulk order can offer discount. More detail，please contact the sales. Kindly note , our remote is the COMPATIBLE / REPLACEMENT /CLONE remote, not the original one. Copy your old remote 1. Copy by face to face 2. Many uses including some car alarms, home alarms, panic buttonsgarage door, rolling curtain, etc 3. copy 99% fixed code learning code remote 4,battery include Product Specifications/Features : The remote you have ,which the Chip number shows:PT2240 PT2260 PT2262 EV1527 FP527 AX5326 PT2262 PT2242 HT600 HT680 HT6207 HT6010 HT6012 HT6014 AX5326-4 SMC5026 SMC5326-3 SMC5326-4 SMC918 SMC918-3ect Pls know it ,it can not copy rolling code remote . Frequency : 433.92MHz Step 1 -delete the existing code of our remote duplicator 1)Click and Hold A and B buttons together - Led will flash 3 times 2)Keep holding A button and release B button 3)Keep holding A button and push B button 3 times, Led will start flashing Non-stop Now press any key on the remote control, LED lights are not bright, so delete code success; if you press the button LED lamp is lit, indicating that the original code is not deleted ! Step 2 - clone your original remote 1)Put both remotes Into back to Back position. Make sure they have direct contact 2)Click and hold 1 button on your original remote and 1 button on your clone remote. Keep holding until led will make 2 blinks then 3 blinks then goes into Steady and you have successfully cloned. ( the left keys follow the same above operation) If for some reason the clone does not go further then 2 blinks , it means the signal does not go through, please shift the remote slowly up and down until you get the point where it will go through.