DFROBOT - Romeo ESP32-S3 Development Board for Robotics FPV RC Car

𝐍𝐎𝐓𝐄: 𝐓𝐈𝐃𝐀𝐊 𝐌𝐄𝐍𝐄𝐑𝐈𝐌𝐀 𝐊𝐋𝐀𝐈𝐌 𝐀𝐓𝐀𝐔 𝐊𝐎𝐌𝐏𝐋𝐀𝐈𝐍 𝐃𝐈 𝐋𝐔𝐀𝐑 𝐒𝐈𝐒𝐓𝐄𝐌 𝐓𝐎𝐊𝐎𝐏𝐄𝐃𝐈𝐀 SKU: KM2003/DFR0994 FEATURES A four-channel 2.5A high-current H-bridge motor driver Supporting both PH/EN control mode and PWM control mode Multiple 5V power outputs, facilitating servo motor control An autonomous camera power circuit On-board GDI display, DVP camera, USB, and MicroSD card interfaces Featuring the on-board ESP32-S3-1U-N16R8 (16MB FLASH / 8MB PSRAM) Enabling dual-mode communication through Wi-Fi and Bluetooth 5 (LE). APPLICATIONS FPV RC car development FPV toy aircraft Simulated flight Aerospace Robot competitions SPECIFICATION Basic Parameters Type-C Input Voltage: 5V Operating Voltage: 3.3V VIN Input Voltage: 7-24V VM Input Voltage: 5-24V Maximum Output Current of 5V Power Supply: 2A Motor Drive Capacity: 2.5A Operating Temperature: 0 to 60℃ Dimension: 25.4x60mm/2.95x3.54 #34; Hardware Information Processor: Xtensa dual-core 32-bit LX7 microprocessor Main Frequency: 240 MHz SRAM: 512KB ROM: 384KB Flash: 16MB PSRAM: 8MB RTC SRAM: 16KB USB: USB 2.0 OTG full-speed WIFI WIFI Protocol: IEEE 802.11b/g/n Bandwidth: Support 20 MHz and 40 MHz at 2.4 GHz band WIFI Mode: Station, SoftAP, SoftAP+Station combined mode WIFI Frequency: 2.4GHz Frame Aggregation: TX/RX A-MPDU, TX/RX A-MSDU Bluetooth Bluetooth Protocol: Bluetooth 5, Bluetooth mesh Ports Digital I/O x27 LED PWM Controller 8 Channels SPI x4 UART x3 I2C x2 I2S x2 IR Transceiver: transmit channel x5, receive channel x5 2×12-bit SAR ADC, 20 Channels DMA Controller: transmit channel x5, receive channel x5 DOCUMENTS SHIPPING LIST Romeo ESP32-S3 Development Board x1 Antena x 1 Camera DSI x1