Filamen runout Sensor untuk Printer 3D Bahan Deteksi Modul

Filamen runout Sensor untuk Printer 3D Bahan Deteksi Modul Selama Barang/Produk Masih Tayang/Aktif Berarti (Stok Tersedia), Bisa Langsung Di Order/Di Beli (Tidak Perlu Chat Toko). Masukkan Keranjang Lalu Bayar. Saat itu Juga Barang/Produk Langsung Kami Kirim. Semua Produk Di Toko Kami Pre Order 6 - 15 Hari Tergantung Stok dan Posisi Gudang Luar Negeri. Anda Order Berarti Anda Setuju Dengan Waktu Pre Order Yang Kami Tetapkan Secara Default 6 - 15 Hari. nullIntroductions:;-;This filament run out sensor unit is designed to detect whether your printing is run out of filament.-;During printing, if the unit detected that there is out of filament it will send a signal to the main board.-;With correct firmware settings, the printing will be paused until the operator reload the filament and resume the printing.;Features:;- It works with all available materials;flexible,clear,opaque,filled,etc.-;The unit can handle as many filaments simultaneously. As soon as one of them will be missing, the unit will send a message to the next one, up to;-;your main board.-;Two screws are provided so you can install it where you want.-;Works with almost any printer.-;Durable injection modeling casing and industrial grade components.Specifications:;Supply Voltage: 3.3-5VOperating Temperature: below 80 „ƒFilament Diameter: 1.75MM(1-2MM)Filament Presence: lowFilament Absent: high(equal to Supply Voltage)Primary cable: 80cmextension cable: 20cmPTFR tuble: 50cmCable color:;Red — 3.3-5VYellow/Blue;—;SignalBlack;—;GND;;1. Install:Please install the unit after the spool and before your extruder.Fix it on your printer and along with the path of the filament is recommend.Pay attention to the direction indicated by the arrow on the body.Inserted the 4mm PTFE tube to both sides of the unit for guiding the filament and help to reduce the friction.;2. Connections:Servo pins always have the right pins:5V, Ground, and Signal.Most endstop pins SKU1318809