Thicken Car Battery Clamp 2 Meters 1000A Battery Copper Line

SEMUA BARANG DIKIRIM DARI LUAR NEGERI PROSES PENGIRIMAN (PRE-ORDER) -+45HARI HARGA YANG DIBAYARKAN DIPEDIA SUDAH TERMASUK BIAYA SHIPPING DAN PAJAK BEA CUKAI Origin : Mainland China Suitable : Displacement below 3.0T Material : PVC+copper Length : 2meters Product Information: [Product name]: 1000A battery [Product packaging]: PVC bag [Product color]: black+red [Product size]: 2meters [Material]: PVC+copper wire The connection procedure is as follows: (1) First, clamp the red wire of the startingon the positive pole of the red battery of the #34;rescued vehicle #34;. (2) Then clamp the red wire at the other end on the positive pole of the red battery of the #34;rescue vehicle #34;. (3) Clamp the black wire on the black negative battery of the #34;rescued vehicle #34;. (4) Then clamp the black wire on the black negative battery of the #34;rescue vehicle #34;. (5) Start the engine of the #34;rescue vehicle #34; first, and then start the engine of the #34;rescued vehicle #34;. If the rescued vehicle is still unable to start, please check the metalpart for poor contact. After starting the engine, it is still necessary to remove the starting grounding wire in sequence, otherwise it may cause a short circuit. The procedure for removing theis as follows: (1) First, remove the black wire of the #34;rescued vehicle #34;. (2) Then remove the black wire of the #34;rescue vehicle #34;. (3) Then remove the red wire of the #34;rescue vehicle #34;. (4) Finally, remove the red wire of the #34;rescued vehicle #34; [Precautions] 1. Operate in strict accordance with the operation steps. 2. Check the marked voltage of the two batteries to ensure that the voltage of the two batteries is the same. 3. Turn off all loads on the vehicle, shift to neutral, pull the handbrake and start the engine. Smoking is prohibited near the vehicle. 4. If the car battery has frozen, it is forbidden to start, otherwise it may cause explosion. 5.