MO Desoldering Pump solder sucker Suction Tin Vacuum Soldering

Desoldering Pump solder sucker Suction Tin Vacuum Soldering Iron Desolder Gun Suction Cup Soldering Sucker Pen Mohon Chat/Noted Untuk Warna dan Type Yang Tersedia *Semua Barang Express-PO(Pre-Order), Anda Order Langsung di Proses Hari itu Juga *Pengiriman Super Cepat 9-14 dari Gudang Pusat *Silahkan Chat Untuk Pengubahan Berat Yang Sesuai *Grosir Bisa Nego Klaim Garansi WAJIB sertakan: - Video Saat Pertama Kali Produk Sampai - Foto Label Pengiriman dan Foto Produk Yang Bermasalah is_customized : Yes Model Number : 336 Brand Name : SZBFT Specifications:Range of temperature regulation: 1Scope of application: Tin removalNet weight: approx. 70gLength: approx. 210mm/190MMMaterial: PlasticMaximum suction: 30Color: BlackOperation Manual:1. Put the tin suctioner piston downward pressure to get stuck.2. Heating solder joints to solder melting with electric soldering iron.3. Remove the iron and quickly put the tin suctioner resistance paste solder solder sucker and press the button.4. If It is not clean at one time and can be repeated many times.Using skills:1. To ensure good solder sucker piston seal. Before electricity with your fingers to plug hole solder sucker head solder sucker head to press the button if the piston is not easy to pop into place that the seal is good.2. The aperture tin suctioner heads are of different sizes select the appropriate specifications.3. Tin suctioner head wears should replace the new one.4. Solder paste is dipped in a little bit of rosin before contact with solder to improve solder fluidity.5. Head contact pads are slightly longer when solder melts the solder joint pin as the center then hand out in a clockwise direction to draw a circle and then press the button tin suctioner.Note:Please allow 1-3 cm differs due to manual measurement.Due to the different display and different light the picture may not show the actual color of t