Atur jumlah dan catatan
Stok: Tidak Dijual
Subtotal
-
Modul Sensor Arus GY-471 MAX471 3A Current Sensor Module
Rp36.500
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Selamat datang di MikroPal - Mikrokontroler Palembang
Mohon dibaca terlebih dahulu!
- Tidak menerima dropship
- Minimum order Rp 25.000,- diluar ongkos kirim
- Sebaiknya tanyakan stok terlebih dahulu
- Pengiriman via Gosend atau Grab sebaiknya dikomunikasikan terlebih dahulu
- Biasakan baca catatan toko dan deskripsi
- This module can be used to test the current and voltage._x000D_
- The principle of voltage test based on principle of resistive voltage divider design, can make the red terminal connector input voltage to 5 times smaller. Analog input voltages up to 5 v, the voltage detection module input voltage not greater than 5Vx5 = 25V (if using 3.3V systems, input voltage not greater than 3.3Vx5 = 16.5V). AVR chips have 10-bit AD, so this module simulates a resolution of 0.00489V (5V / 1023), so the minimum voltage of input voltage detection module is 0.00489 Vx5 = 0.02445V._x000D_
- The MAX471 chip on the board used to test the consume current of the load._x000D_
_x000D_
Paramenter:_x000D_
- Test Voltage range: DC3 - 25V (Arduino work on 5V) or DC3 - 16.5V (work on 3.3V)_x000D_
- Test Current range: DC 0 - 3A_x000D_
_x000D_
Dengan Arduino:_x000D_
http://www.kevingulling.com/2017/03/arduino-gy-max471-voltage-and-current-testing-module/
Mohon dibaca terlebih dahulu!
- Tidak menerima dropship
- Minimum order Rp 25.000,- diluar ongkos kirim
- Sebaiknya tanyakan stok terlebih dahulu
- Pengiriman via Gosend atau Grab sebaiknya dikomunikasikan terlebih dahulu
- Biasakan baca catatan toko dan deskripsi
- This module can be used to test the current and voltage._x000D_
- The principle of voltage test based on principle of resistive voltage divider design, can make the red terminal connector input voltage to 5 times smaller. Analog input voltages up to 5 v, the voltage detection module input voltage not greater than 5Vx5 = 25V (if using 3.3V systems, input voltage not greater than 3.3Vx5 = 16.5V). AVR chips have 10-bit AD, so this module simulates a resolution of 0.00489V (5V / 1023), so the minimum voltage of input voltage detection module is 0.00489 Vx5 = 0.02445V._x000D_
- The MAX471 chip on the board used to test the consume current of the load._x000D_
_x000D_
Paramenter:_x000D_
- Test Voltage range: DC3 - 25V (Arduino work on 5V) or DC3 - 16.5V (work on 3.3V)_x000D_
- Test Current range: DC 0 - 3A_x000D_
_x000D_
Dengan Arduino:_x000D_
http://www.kevingulling.com/2017/03/arduino-gy-max471-voltage-and-current-testing-module/
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan