5.0/ 5.0
100% pembeli merasa puas
4 rating • 2 ulasan
5(4)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 36
Subtotal
Rp140.000
Coin Slot Selector Acceptor Electronic Vertical (lubang atas) Wei-Ya
Rp140.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Coin Slot, Coin Selector, Coin Acceptor Electronic Vertikal / Lubang Atas
Merk Wei-Ya, type HI-08CS
Made in Taiwan
Berfungsi sebagai memasukkan/menerima/memilah coin yang telah disetting (coin yang diinginkan). Jika memasukkan coin yang berbeda, maka coin tersebut akan di keluarkan / di reject.
12vdc, signal input, counter signal
Acceptable for All Coins
Super Sensitive for Filter Coins
Anti-Coin Roll Down Speed
Anti-Water Injection
Can Connect Counters
Specification Voltage: DC12V +-20%
Coin Diameter: 18mm ~ 31mm
Coin Thickness: 1.2mm ~ 3.0mm
Temperature: -10C ~ 65C
Installation:
Remove the Factory Plastic Token from the Coin Sampling
Clamp & Install the Right Coin Used
Slide the Coin Clamp Backward & Insert a Right Coin into the Clamp Slot, Then Insert Slot Opening Size by Loosening the Screw in the Back Side of Front Panel to Fit Your Coins Diameter if Necessary, That Can Prevent the Bigger Invalid Coins from Inserting
Select the Right Mode Between Normal Open & Normal Close
Choose the Right Speed of Coin Acceptance Among:
* 100ms (slow speed/long pulse)
* 50ms (medium sped/medium pulse)
* 30ms (short sped/short pulse)
by Timer Switch for Synchronizing with Your Software
Merk Wei-Ya, type HI-08CS
Made in Taiwan
Berfungsi sebagai memasukkan/menerima/memilah coin yang telah disetting (coin yang diinginkan). Jika memasukkan coin yang berbeda, maka coin tersebut akan di keluarkan / di reject.
12vdc, signal input, counter signal
Acceptable for All Coins
Super Sensitive for Filter Coins
Anti-Coin Roll Down Speed
Anti-Water Injection
Can Connect Counters
Specification Voltage: DC12V +-20%
Coin Diameter: 18mm ~ 31mm
Coin Thickness: 1.2mm ~ 3.0mm
Temperature: -10C ~ 65C
Installation:
Remove the Factory Plastic Token from the Coin Sampling
Clamp & Install the Right Coin Used
Slide the Coin Clamp Backward & Insert a Right Coin into the Clamp Slot, Then Insert Slot Opening Size by Loosening the Screw in the Back Side of Front Panel to Fit Your Coins Diameter if Necessary, That Can Prevent the Bigger Invalid Coins from Inserting
Select the Right Mode Between Normal Open & Normal Close
Choose the Right Speed of Coin Acceptance Among:
* 100ms (slow speed/long pulse)
* 50ms (medium sped/medium pulse)
* 30ms (short sped/short pulse)
by Timer Switch for Synchronizing with Your Software
Ada masalah dengan produk ini?