Radxa X4 Mini PC SBC + Rp2040 GPIO with Intel N100, Dual 4K Output, 2.5Gbps Ethernet, PCIe 3.0 M.2 M Key, WiFi 5/6 - X4 4GB

Wajib pake Heatsink, karena panas


CPU Intel Processor N100 (Alder Lake-N)- Total Cores: 4- Total Threads: 4- Max Turbo Frequency: 3.40 GHz- Cache: 6 MB Intel Smart Cache- Intel Gaussian & Neural Accelerator 3.0- Intel Image Processing Unit 6.0- Support for Intel Virtualization Technology
GPU - Intel UHD Graphics- Graphics Max Dynamic Frequency: 750 MHz- DirectX Support: 12.1- OpenGL Support: 4.6- OpenCL Support: 3.0
RAM LPDDR5 RAMMaximum Frequency of 4800 MT/s- 4GB- 8GB- 12GB- 16GB
Storage Optional Onboard eMMCSPI Flash for BIOS1x M.2 M Key Connector with PCIe 3.0 4-lane for M.2 2230 NVMe SSD
Display Dual Display Outputs via Two Micro HDMI up to 4Kp60
Ethernet 1x 2.5G Ethernet Port with PoE Support(Additional PoE HAT Required)Wireless Connectivity- IEEE 802.11 a/b/g/n/ac/ax (WiFi 6) and Bluetooth 5.2 with BLE- IEEE 802.11 a/b/g/n/ac (WiFi 5) and Bluetooth 5.0 with BLE
USB 1x USB 2.0 HOST Type A Port3x USB 3.0 HOST Type A Ports
Audio 1x Headphone Jack with Microphone Input
Connectivity 1x RTC Battery Socket1x 2-Pin Fan Header1x 2-Pin Power Input Header40-Pin Color GPIO Header- Up to 2x SPI- Up to 2x UART- Up to 2x I2C- Up to 16x PWM- Up to 8x PIO(Programmable IO)- 2 x 5V DC power out- 2 x 3.3V power out
Button 1x Power Button is used for powering on and off1x BOOTSEL Button is used to put the RP2040 into USB mass storage mode for firmware upload.
Software Windows 10 / 11Debian / Ubuntu Linux support
Power Requirements The Radxa X4 supports the following power input:- USB Type-C PD Version 2.0 with 12V/2.5A.The recommended power source should be able to produce, at least, 18W without power consuming devices on USB 3 or 25W with full USB ports load.
Operating Conditions Recommended environmental temperature: 0 ~ 50°C
Dimension 85 mm x 56 mm