Atur jumlah dan catatan
Stok Total: 42
harga sebelum diskonRp144.000
Subtotal
Rp141.120
Permatex Ultra Grey Rigid High-Torque RTV Silicone Gasket Maker Terlaris
Rp141.120
diskon 2%
Harga sebelum diskon Rp144.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Selamat datang di toko kami :)
Permatex Ultra Grey Rigid High-Torque RTV Silicone Gasket Maker
Automobile
Suggested Applications: Valve covers, oil pans, automatic transmission pans, intake manifold end seals, timing covers, water pumps, thermostat housings
Heavy Duty
Suggested Applications: Cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flanges
DIRECTIONS:
1. For best results, clean and dry all surfaces with a residue-free solvent such as Permatex" Brake & Parts Cleaner.
2. Cut nozzle to desired bead size. Gaskets are best formed using a 1/16''" to 1/4''" (2 to 6 mm) bead.
3. Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn.
4. Silicone will skin over in one hour and fully cure in 24 hours under normal conditions. Allow more time for cold or very dry conditions. Clean uncured silicone from hands, tools and clothing with Permatex" Fast Orange" Wipes or Fast Orange" Hand Cleaner.
Selama iklan masih ada 99% produk ready stok.
Selamat Berbelanja & Happy Shopping day!
Permatex Ultra Grey Rigid High-Torque RTV Silicone Gasket Maker
Automobile
Suggested Applications: Valve covers, oil pans, automatic transmission pans, intake manifold end seals, timing covers, water pumps, thermostat housings
Heavy Duty
Suggested Applications: Cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flanges
DIRECTIONS:
1. For best results, clean and dry all surfaces with a residue-free solvent such as Permatex" Brake & Parts Cleaner.
2. Cut nozzle to desired bead size. Gaskets are best formed using a 1/16''" to 1/4''" (2 to 6 mm) bead.
3. Apply a continuous, even bead of silicone to one surface, surrounding all bolt holes. Assemble parts immediately while silicone is still wet. Finger tighten until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn.
4. Silicone will skin over in one hour and fully cure in 24 hours under normal conditions. Allow more time for cold or very dry conditions. Clean uncured silicone from hands, tools and clothing with Permatex" Fast Orange" Wipes or Fast Orange" Hand Cleaner.
Selama iklan masih ada 99% produk ready stok.
Selamat Berbelanja & Happy Shopping day!
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan