SINOGRACE PF-206 WATER OIL REPELLENT SUPER HYDROPOBIC COATING LIQUID

CONCENTRATE Volume = 1,000ml/ kemasan MSDS READY !! SINOGRACE PF-206 WATER OIL REPELLENT SUPER HYDROPOBIC COATING LIQUID is a Water based super hydrophobic coating PF-206 is an aqueous emulsion and containing no flammable solvents, the new C6-fluorocarbon shows full performance regarding water, soil and oil repellency after drying. Suitable for all fiber types, laminates, leather and hard surfaces. TYPE: Textile self-cleaning nano coating Key features: -Easy-to-clean effects -Free of PFOA and PFOS -Fabric color and handle are not affected -Outstanding and durable oil, soil and water repellency -No silicone-based and metalorganic compounds contained -Resistant to washing and dry cleaning when combined with crosslinker -Suitable for all fiber types, laminates, leather and textile surfaces Typical properties: Appearance： Yellowish milky liquid Solid content (%)： 20 pH (50% in water)： 3.0-5.0 Density (g/cm3 at 20℃)： 1.07±0.03 Viscosity (mPa·s at 20℃)： 30-150mPa·s at 20℃ Application: -Fabric, Textile, Cotton, Wool, Polyester fabric, Suede/leather corduroy etc. -Clean the textile products (clothes, shoes etc) -Dry it under room temperature -Dilute the PF-206 by mixing with water (1 part PF-206 to 10~12 parts water) Spray the diluted solution on the textile products or dipping it into solution Dry it under high temperature ( gt;100℃) for 10-15min by using dryer, household electric iron, blower and laundry drier etc. Industrial application The preparation of solution Firstly, add the quantitative PF-206 into a container, and then the quantitative water is added into. Finally, stir the solution at a low speed until uniformity. While using it with crosslinking agent, penetrating agent, crease resistant resin and other additives together, all of these additives should be separately diluted and avoid additives raw solution mixing. The recommended dosage: -Polyester fabric: 10~25 g/L -Nylon fabric: 10~ 25g/L -Polyester or cotton fabric: 15~40 g/L