4 Dof Metal Mechanical Arm Robot Manipulator Robotics Part for DIY RC Toy Remote Control Clamp With Mg996R Servos For

4 Dof Metal Mechanical Arm Robot Manipulator Robotics Part for DIY RC Toy Remote Control Clamp With Mg996R Servos For Arduino 32612049693 Pre-Order +/- Sampai Alamat 10-15 Hari FREE ONGKIR+PAJAK Garansi uang kembali jika Rusak, Beda Produk Wheelbase : Screws Size : none Technical parameters : Value 2 Model Number : robot For Vehicle Type : Cars Tool Supplies : Cutting Four-wheel Drive Attributes : Assemblage Remote Control Peripherals/Devices : RECEIVERS Upgrade Parts/Accessories : Frame RC Parts amp; Accs : Connectors/Wiring Material : Metal Brand Name : SZDoit Use : Vehicles amp; Remote Control Toys Product Introduction This manipulator is a 4-DOF manipulator designed by multiple aluminum alloy steering gear brackets. Note: Contact us for manual please Product Parameters Product name: 6 DOF robotic arm Total weight of the kit: 550g Robot arm height: 35.5cm Single manipulator parameters: Working voltage: 4.8-6V Claw material: all aluminum alloy Claw weight: about 68g (excluding servo) MG996 servo attributes: Product size: 40.7*19.9*42.9mm Product tension: 15KG/17kg/20KG/25kgcm (6V) Response speed: 0.17sec/60 degrees (4.8v no load) 0.14sec/60 degrees (6v no load) Working voltage: 4.8-6V Working temperature: 0-55 Gear form: metal gear Working dead zone: 2us (microseconds) Three lines of servo connector: yellow--signal red--positive brown--negative Shipping list: 1 set of metal parts for robot arm 4 MG996R servos option) Enough screws to install 1 pack Note: There are no gear wheels if you choose #39; no servo #39; option Not included any controller or battery; The robot arm is NOT include servos and metal steering wheels; For the shipping convenience, the product is unassembled. Images: Product Introduction This manipulator is a 4-DOF manipulator designed by multiple aluminum alloy steering gear bracket