Atur jumlah dan catatan
Stok Total: 15
Subtotal
Rp349.000
Dfrobot : Analog Turbidity Sensor For Arduino Terlaris
Rp349.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Terima kasih telah berkunjung ke toko kami..... Silahkan baca deskripsi dan catatan toko kam
membeli = setuju dengan catatan toko kami..
šššš: ššššš šššššššš ššššš šššš šššššššš šš šššš šššššš ššššššššš
Code: SEN0189
SKU: KG3001
Product Name : Analog Turbidity Sensor For Arduino
Brand : DFRobot
ššš¦š„šš£š§šš¢š”:
The arduino turbidity sensor detects water quality by measuring level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. As the TTS increases, the liquid turbidity level increases. You may also check Liquid Sensor Selection Guide to get better familar with our liquid sensor series.
This arduino turbidity sensor have both analog and digital signal output modes. You can select the mode according to the MCU as threshold is adjustable in digital signal mode.
Turbidity sensors can be used in measurement of water quality in rivers and streams, wastewater and effluent measurements, sediment transport research and laboratory measurements.
šššššš ššššš:
Operating Voltage: 5V DC
Operating Current: 40mA (MAX)
Insulation Resistance: 100M (Min)
Output Method:Analog
Analog output: 0-4.5V
Digital Output: High/Low level signal (you can adjust the threshold value by adjusting the potentiometer)
Operating Temperature: 5ā~90 ā
Storage Temperature: -10ā~90ā
Weight: 30g
Adapter Dimensions: 38mm*28mm*10mm/1.5inches *1.1inches*0.4inche
ššššššš šššš:
Turbidity sensor adapter x1
Turbidity sensor probe x1
Turbidity sensor cable x1
Gravity analog sensor cable x1
harap tambahkan video unboxing setiap membuka paket jikalau terjadi kesalahan produk atau kerusakan barang waktu dalam pengiriman
membeli = setuju dengan catatan toko kami..
šššš: ššššš šššššššš ššššš šššš šššššššš šš šššš šššššš ššššššššš
Code: SEN0189
SKU: KG3001
Product Name : Analog Turbidity Sensor For Arduino
Brand : DFRobot
ššš¦š„šš£š§šš¢š”:
The arduino turbidity sensor detects water quality by measuring level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. As the TTS increases, the liquid turbidity level increases. You may also check Liquid Sensor Selection Guide to get better familar with our liquid sensor series.
This arduino turbidity sensor have both analog and digital signal output modes. You can select the mode according to the MCU as threshold is adjustable in digital signal mode.
Turbidity sensors can be used in measurement of water quality in rivers and streams, wastewater and effluent measurements, sediment transport research and laboratory measurements.
šššššš ššššš:
Operating Voltage: 5V DC
Operating Current: 40mA (MAX)
Insulation Resistance: 100M (Min)
Output Method:Analog
Analog output: 0-4.5V
Digital Output: High/Low level signal (you can adjust the threshold value by adjusting the potentiometer)
Operating Temperature: 5ā~90 ā
Storage Temperature: -10ā~90ā
Weight: 30g
Adapter Dimensions: 38mm*28mm*10mm/1.5inches *1.1inches*0.4inche
ššššššš šššš:
Turbidity sensor adapter x1
Turbidity sensor probe x1
Turbidity sensor cable x1
Gravity analog sensor cable x1
harap tambahkan video unboxing setiap membuka paket jikalau terjadi kesalahan produk atau kerusakan barang waktu dalam pengiriman
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan