Atur jumlah dan catatan
Stok Total: 100
Subtotal
Rp120.000
Module Remote Wireless 2 Gang 2 Way RF 433MHZ Mini Switch Home
Rp120.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: elektronik
Note:
1. This device does not need to be connected to the neutral wire. If the power of the bulb is 5-150W/each gang, it is generally not necessary to install a capacitor. If the bulb below 5W flickers, you can install a capacitor at the bulb position
2. When wiring the controller, note that the input and output terminals should not be installed upside down
3. When testing, you can't just connect to the input but not the output. Both the input and output must be wired.
4. Capacitors generally do not need to be installed. If you find that the bulb is flickering, please install the capacitor. The capacitor is installed at the position of the bulb instead of the back of the switch.
Main feature:
1. Single live wire: no natural wire is required, suitable for most families, no need to climb to the ceiling to install, more convenient
2. No need to install capacitors: 5-150W bulbs do not need to install capacitors. If the bulb below 5W flickers, you can install a capacitor at the bulb position
3. Mini body: it can be directly installed in the switch bottom box, which is more convenient for maintenance and installation
4.100m open distance, more convenient to use, the actual distance depends on the obstacles, the more obstacles, the shorter the distance and the more serious the signal loss
5. After power off, call again, the default is off
6. Support dual control: can be used with the dual control switch before connecting to the home
7. Support 1gang 2gang mechanical switch: support 2gang 2way, 2gang 1way, 1gang 1way, 1gang 2way various wiring methods
Main Specifications:
Voltage: 100~240V, 50-60HZ
Power: 5W<150W /each gang
Working frequency: 433.92MHZ
Material: PC flame retardant V0
Dimensions: 59x42x20mm
Learning Code: EV 1527
1. This device does not need to be connected to the neutral wire. If the power of the bulb is 5-150W/each gang, it is generally not necessary to install a capacitor. If the bulb below 5W flickers, you can install a capacitor at the bulb position
2. When wiring the controller, note that the input and output terminals should not be installed upside down
3. When testing, you can't just connect to the input but not the output. Both the input and output must be wired.
4. Capacitors generally do not need to be installed. If you find that the bulb is flickering, please install the capacitor. The capacitor is installed at the position of the bulb instead of the back of the switch.
Main feature:
1. Single live wire: no natural wire is required, suitable for most families, no need to climb to the ceiling to install, more convenient
2. No need to install capacitors: 5-150W bulbs do not need to install capacitors. If the bulb below 5W flickers, you can install a capacitor at the bulb position
3. Mini body: it can be directly installed in the switch bottom box, which is more convenient for maintenance and installation
4.100m open distance, more convenient to use, the actual distance depends on the obstacles, the more obstacles, the shorter the distance and the more serious the signal loss
5. After power off, call again, the default is off
6. Support dual control: can be used with the dual control switch before connecting to the home
7. Support 1gang 2gang mechanical switch: support 2gang 2way, 2gang 1way, 1gang 1way, 1gang 2way various wiring methods
Main Specifications:
Voltage: 100~240V, 50-60HZ
Power: 5W<150W /each gang
Working frequency: 433.92MHZ
Material: PC flame retardant V0
Dimensions: 59x42x20mm
Learning Code: EV 1527
Ada masalah dengan produk ini?
ULASAN PEMBELI
Belum ada ulasan untuk produk ini
Beli produk ini dan jadilah yang pertama memberikan ulasan