Vibration Polishing Machine Bracelet Desktop Jewelry Buddha Beads

Wheel Diameter : 6-10inch Rated Input Power : 130W Brand Name : Onkel.J Origin : Mainland China Certification : NONE Steps of vibrating walnut glazing: 1. Drain the walnuts, abrasives, and abrasives with water and shake them for about 18-24 hours. 2. Walnut + Brazilian rice wax (yellow) + walnut, shake for 18-20 hours. Don #39;t add water, just toss it dry. Vibration machine jade polishing steps: 1. Abrasive +240# emery + jade, and then add some water. The emery is damp. If there is too much water in the vibrator, the sand will sink to the bottom and cannot be turned up. If there is too little water in the vibrator, the turning speed is too slow and the vibration Sprinkle some water every 3-4 hours for about 24 hours. 2. Wash the jade and abrasives, and the abrasives, each must be washed clean, and then the abrasive 600# emery + jade, the sand is damp, and vibrate for about 18-24 hours. 3. After washing the jade, abrasive, and abrasive, use abrasive +1000# emery + jade, the sand is damp, and vibrate for about 18-24 hours. 4. After washing the jade, abrasive, and abrasive, use abrasive +2000# emery + jade, the sand is damp, and vibrate for about 18-24 hours. The working principle of the shock machine: Using the principle of spiral tumbling flow and three-dimensional vibration, the gemstone rolls around the center of the container ring during the vibration process, thereby prompting the abrasive and polishing agent to quickly produce rolling and sliding friction interactions to achieve high-speed, high-quality automatic polishing effects. 5. After washing the jade, abrasives, and abrasives, use abrasive +3000# emery + jade, the sand is damp, and vibrate for about 18