4.9/ 5.0
96% pembeli merasa puas
28 rating • 9 ulasan
5(27)96.43%
4(0)0%
3(0)0%
2(1)3.57%
1(0)0%
Atur jumlah dan catatan
Stok: Habis
Subtotal
-
Perekat printer 3D built plate | 3D printer adhesive spray 100 ML
Rp26.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
klin's Indonesia sudah terdaftar pada Dirjen HAKI (Direktorat Jenderal Kekayaan Intelektual) tanggal 11 Desember 2018 dengan nomor IDM.000636808
Klin’s 3D Printer Adhesive Spray
“Warping-Free”
• Easy to use
• Excellent adhesive effect
• Works with heated and non-heated pressure plates
• Compatible with PLA, ABS, PET-G, TPU, most Nylons, filaments with fibres, wood filaments, PVA, some PC and PC-ABS.
Klin’s 3D Printer Adhesive Spray is the solution against warping. With its effective formula, the 3D printing remains fixed on the printing plate until the 3D printing is finished.
During the printing process, Klin’s 3D Printer Adhesive Spray connects the filament with the printing plate to ensure secure adhesion.
Klin’s 3D Printer Adhesive Spray ensure a warping-free 3D printing, thus eliminating one of the most common problems, especially when using ABS filament.
Directions:
1. Clean the 3D printer bed with klin’s 3D Printer Bed Cleaner.
2. Shake the bottle well for 5 seconds.
3. Spray away overlapping circles on the build plate.
4. Let it dry for 30 seconds.
5. Gentle wipe the surface with a soft piece of cloth or absorbing paper.
6. Start the print process with the recommended settings of the filament.
7. After the print has finished, remove it carefully with spatula.
8. The base can be cleaned with klin’s 3D Printer Bed Cleaner, a special product for this type of use.
9. Do not use on a warm printer bed.
10.The maximum working point of Klin’s 3D Printer Adhesive Spray is between 80°C and 100°C.
CAUTION: Flammable. Eye Irritant.
PRECAUTIONARY MEASURES: Keep away from heat, sparks, flames and other ignition sources. Store below 48°C. Avoid contact with eyes.
FIRST AID: In case of eye contact, flush thoroughly with water for at least 15 minutes. If irritation persists, contact a physician.
KEEP OUT OF REACH OF CHILDREN AND PETS.
Netto: Spray 100 mL.
Klin’s 3D Printer Adhesive Spray
“Warping-Free”
• Easy to use
• Excellent adhesive effect
• Works with heated and non-heated pressure plates
• Compatible with PLA, ABS, PET-G, TPU, most Nylons, filaments with fibres, wood filaments, PVA, some PC and PC-ABS.
Klin’s 3D Printer Adhesive Spray is the solution against warping. With its effective formula, the 3D printing remains fixed on the printing plate until the 3D printing is finished.
During the printing process, Klin’s 3D Printer Adhesive Spray connects the filament with the printing plate to ensure secure adhesion.
Klin’s 3D Printer Adhesive Spray ensure a warping-free 3D printing, thus eliminating one of the most common problems, especially when using ABS filament.
Directions:
1. Clean the 3D printer bed with klin’s 3D Printer Bed Cleaner.
2. Shake the bottle well for 5 seconds.
3. Spray away overlapping circles on the build plate.
4. Let it dry for 30 seconds.
5. Gentle wipe the surface with a soft piece of cloth or absorbing paper.
6. Start the print process with the recommended settings of the filament.
7. After the print has finished, remove it carefully with spatula.
8. The base can be cleaned with klin’s 3D Printer Bed Cleaner, a special product for this type of use.
9. Do not use on a warm printer bed.
10.The maximum working point of Klin’s 3D Printer Adhesive Spray is between 80°C and 100°C.
CAUTION: Flammable. Eye Irritant.
PRECAUTIONARY MEASURES: Keep away from heat, sparks, flames and other ignition sources. Store below 48°C. Avoid contact with eyes.
FIRST AID: In case of eye contact, flush thoroughly with water for at least 15 minutes. If irritation persists, contact a physician.
KEEP OUT OF REACH OF CHILDREN AND PETS.
Netto: Spray 100 mL.
Ada masalah dengan produk ini?