ESTRONG | StrongBond AR | Acrylic Bonding Agents | 20 KG / PAIL

StrongBond AR is a high-solid, acrylic polymer latex admixture and bonding agent. This milky white liquid is non-yellowing in Portland cement mortars and concrete. When used as an admixture, StrongBond AR provides increased abrasion, impact and crack resistance, flexural strength, and freeze/thaw tolerance. Permeability is also reduced, providing added protection from chloride intrusion and scaling. StrongBond AR when used to make a slurry bond coat enhances the bond between the existing concrete and placement of the fresh cement-based concrete topping or repair mortar. StrongBond AR will not re-emulsify once allowed to fully dry. Uses StrongBond AR is a bonding agent for concrete repair system. Concrete repairs/mortars fortified with StrongBond AR are ideal for interior, exterior, and moisture-related applications. Typical areas that would benefit from properties of this product include concrete, toppings, mortars, grouts, and vertical, horizontal, and overhead patching. For enhanced bonding, use StrongBond AR as an additive in slurry bond coats. It acts as curing compound when sprayed onto freshly applied repair patches. Advantages • Single component. • Long open times, designed for ease of use under site condition • Improve mortar cohesion and workability. • Excellent bond strength between polymers modified mortars and concrete. • Cost effective and economical in use. • Improve waterproofing properties • Water resistant, can be used internally and externally with complete safely. • Reduce permeability of concrete or mortar and improve chemical resistant. Packing amp; Size StrongBond AR 20 kg pail Coverage StrongBond AR 4 – 6 m2 per kg depend on porosity of substrate