New 50ml Loctite 601 638 640 680 Cylindrical Parts Holding Glue High

Application Materials : Metal is_customized : No Model Number : 601/603/680/620/609/638/648 Origin : Mainland China Certification : NONE Type : Caulk Type of hot melt adhesive : Anaerobic adhesive Active life : 3 (min) Classification of resin gum : Acrylic glue Packing specification : 50ml Tips for use: Before sizing, it is recommended to use Loctite SF7365 component cleaner to clean the components. Lotte SF7365 part smoothing agent is a general-purpose part cleaning agent suitable for metal and plastic. This product removes most oil, grease, lubricants, metal shavings and drying residues. If the cylinder is used in an environment below 15, it is recommended to use loctite 5F7649 activator in advance. Locite SF7649 activator will not significantly reduce the bonding strength when increasing the curing rate of anaerobic adhesive and sealant. It is especially suitable for the application of inert metal surfaces or inert working surfaces with large bonding gaps. Features: Product name: Loctite 601 cylinder holding adhesive Net capacity: 50ml Color: Green Viscosity (mPa) s) : 125 Maximum filling clearance (mm):0.05 Shear strength (PSI):3770 Initial curing time: 30 minutes Full curing time: 24 hours Relative density: 1.1 Typical use: low viscosity is suitable for small clearance, with clearance less than 0.05mm below the cylindrical parts of the fastening operation, a variety of metal materials have a good bonding effect. Product name: Loctite 603 cylinder holding adhesive Net capacity: 50ml Color: Green Viscosity (mPa) s) : 100/150 Maximum filling clearance (mm):0.127 Shear strength (PSI):3770 Initial curing time: 30 minutes Full curing t