5.0/ 5.0
100% pembeli merasa puas
17 rating • 4 ulasan
5(17)100%
4(0)0%
3(0)0%
2(0)0%
1(0)0%
Atur jumlah dan catatan
Stok Total: 27
Subtotal
Rp100.000
DFRobot Gravity : Analog Current to Voltage Converter for 4~20mA
Rp100.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: 04 - DFROBOT OFFICIAL
𝐍𝐎𝐓𝐄: 𝐓𝐈𝐃𝐀𝐊 𝐌𝐄𝐍𝐄𝐑𝐈𝐌𝐀 𝐊𝐋𝐀𝐈𝐌 𝐀𝐓𝐀𝐔 𝐊𝐎𝐌𝐏𝐋𝐀𝐈𝐍 𝐃𝐈 𝐋𝐔𝐀𝐑 𝐒𝐈𝐒𝐓𝐄𝐌 𝐓𝐎𝐊𝐎𝐏𝐄𝐃𝐈𝐀
SKU: KG4008
CODE: SEN0262
INTRODUCTION
This current-to-voltage module can linearly convert 0~25mA current signals into 0~3V voltage signals. Industrial sensors or devices usually have the current signal output of 4~20 mA. With this current-to-voltage module, your main control board can easily attain the current signals input from industrial sensors or devices.
NOTE: For higher accuracy, it is recommended to measure with 12 or more bit ADC!
FEATURES
Support wide voltage of 3.3~5.5V
Deploy 0.1% high precision sense resistor and ultra low noise rail-to-rail zero-drift op amp, high accuracy, and no need to calibration
Wide measurement range up to 0~25mA, which is compatible with fault diagnosis, overrun detection applications
SPECIFICATION
Supply Voltage: 3.3~5.5V
Detection Range: 0~25mA DC
Measurement Accuracy: ±0.5% F.S. @ 16-bit ADC, ±2% F.S. @ 10-bit ADC
Termination Resistance: 120Ω
Connector Type: PH2.0-3P
Product Size: 30mm * 22mm (1.18inch * 0.87inch)
Wiki: https://www.dfrobot.com/wiki/index.php/Gravity:_Analog_Current_to_Voltage_Converter(for_4~20mA_Application)_SKU:SEN0262
SHIPPING LIST
Analog Current to Voltage Converter x1
Digital Sensor Cable 3pin x1
SKU: KG4008
CODE: SEN0262
INTRODUCTION
This current-to-voltage module can linearly convert 0~25mA current signals into 0~3V voltage signals. Industrial sensors or devices usually have the current signal output of 4~20 mA. With this current-to-voltage module, your main control board can easily attain the current signals input from industrial sensors or devices.
NOTE: For higher accuracy, it is recommended to measure with 12 or more bit ADC!
FEATURES
Support wide voltage of 3.3~5.5V
Deploy 0.1% high precision sense resistor and ultra low noise rail-to-rail zero-drift op amp, high accuracy, and no need to calibration
Wide measurement range up to 0~25mA, which is compatible with fault diagnosis, overrun detection applications
SPECIFICATION
Supply Voltage: 3.3~5.5V
Detection Range: 0~25mA DC
Measurement Accuracy: ±0.5% F.S. @ 16-bit ADC, ±2% F.S. @ 10-bit ADC
Termination Resistance: 120Ω
Connector Type: PH2.0-3P
Product Size: 30mm * 22mm (1.18inch * 0.87inch)
Wiki: https://www.dfrobot.com/wiki/index.php/Gravity:_Analog_Current_to_Voltage_Converter(for_4~20mA_Application)_SKU:SEN0262
SHIPPING LIST
Analog Current to Voltage Converter x1
Digital Sensor Cable 3pin x1
Ada masalah dengan produk ini?